U840 APEM Components, U840 Datasheet - Page 31

• Manufacturer Part Number: U840
• Description: Switch Boot
• Manufacturer: APEM Components

Specifications of U840

• Leaded Process Compatible: Yes
• For Use With: U480 And U2900 Caps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

C
C30
/UL
HARDWARE SUPPLIED
(See Hardware section of catalog)
Panel mounted 300 Series switches with threaded 1/4" bushing are supplied with 1 Hex Nut A112 and 1 Lockwasher A115.
Panel mounted 300 Series switches with threaded 15/32" bushing are supplied with 2 Hex Nuts A465 and 1 Lockwasher A466.
Panel mounted 306 Series switches with threaded 5/16" bushing are supplied with 1 Hex Nut A713 and 1 Lockwasher A734.
Panel mounted 400 Series switches with threaded bushing are supplied with 1 Panel Dress Nut A274 and 1 Lockwasher A115.
B
Q
G
N
T
APEM
For power circuits - coin silver
RATING: 0.5 Amps at 250 VAC (75% power factor).
Underwriter Laboratories file no. E66367. Note - applicable only to terminations with coin silver contacts (Q or G options).
300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES
Dry circuit - gold over nickel over brass.
RATING: 0.4 Volt-Amps (VA) max. at 20 V max.
ELECTRIC LIFE: 250,000 cycles minimum.
Power circuit - coin silver.
RATING: 1 Amp at 120 VAC or 28 VDC or 0.5 Amps at 250 VAC. ELECTRIC LIFE: 250,000 cycles minimum at full load.
Also - 3 Amps at 120 VAC or 28 VDC or 1.5 Amps at 250 VAC. ELECTRIC LIFE: 10,000 cycles minimum at full load.
Dry circuit or power circuit - gold over nickel over coin silver.
Dry circuit - gold over nickel over coin silver.
RATINGS & ELECTRIC LIFE: Same as B & Q above -i.e.- can be used in either dry circuit or power circuit, however once
used in power circuit, switch cannot be re-used in dry circuit. This option permits customers to inventory one switch to
satisfy either application,
RATING: 0.4 Volt-Amps (VA) max. at 20 V max. Note- less gold than B option.
ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute.
Power circuit - Silver plate over brass.
RATING: 0.5 Amps at 120 VAC or 0.25 Amps at 250 VAC (resistive loads).
ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute.
Solder dipped terminals and custom
contact plating available - contact factory.
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: [phone] FAX: [phone] E-mail: [e-mail]
Accepts all 1/4" threaded bushings
CONTACT MATERIAL OPTIONS
PANEL CUT-OUTS
HARDWARE
UL OPTION
Accepts all 15/32" threaded bushings