605-00005 Parallax Inc, 605-00005 Datasheet - Page 7

• Manufacturer Part Number: 605-00005
• Description: IC SENSOR CAM HALL EFFECT TO-92
• Manufacturer: Parallax Inc
• Type: Special Purposer

Specifications of 605-00005

• Sensing Range: 400mT Trip, 50mT Release
• Voltage - Supply: 3.5 V ~ 24 V
• Current - Supply: 6mA
• Current - Output (max): 25mA
• Output Type: Digital, Open Collector
• Features: Gear Tooth Type
• Operating Temperature: -40°C ~ 150°C
• Package / Case: TO-92
• Product: Microcontroller Accessories
• Data Bus Width: 10 bit
• Clock Speed: 15 KHz
• Operating Supply Voltage: 24 V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

3901090217
Rev. 009
Reliability Information
This Melexis device is classified and qualified regarding soldering technology, solderability and
moisture sensitivity level, as defined in this specification, according to following test methods:
(regarding peak temperature, temperature gradient, temperature profile etc) additional classifica-
tion and qualification tests have to be agreed upon with Melexis.
garding assurance of adhesive strength between device and board.
(Directive on the Restriction of the Use of Certain Hazardous substances, RoHS) and customer
requests, Melexis has installed a Roadmap to qualify their package families for lead free proc-
esses also.
http://www.melexis.com/html/pdf/MLXleadfree-statement.pdf
ESD Procautions
Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).
Always observe Electro Static Discharge control procedures whenever handling semiconductor
products.
vices
Resistance to soldering temperature for through-hole mounted devices
Resistance to soldering temperature for through-hole mounted devices
Solderability
Various lead free generic qualifications are running, current results on request.
Moisture/Reflow Sensitivity Classification For Nonhermetic Solid State Surface Mount De-
EIA/JEDEC JESD22-A113
Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing
(reflow profiles according to table 2)
CECC00802
Standard Method For The Specification of Surface Mounting Components (SMDs) of
Assessed Quality
EIA/JEDEC JESD22-B106
EN60749-15
MIL 883 Method 2003 / EIA/JEDEC JESD22-B102
For all soldering technologies deviating from above mentioned standard conditions
The application of Wave Soldering for SMD’s is allowed only after consulting Melexis re-
Based on Melexis commitment to environmental responsibility, European legislation
For more information on manufacturability/solderability see quality page at our website:
IPC/JEDEC J-STD-020
(classification reflow profiles according to table 5-2)
Page 7
Hall-Effect Cam Sensor
MLX90217
Jun/04