TC07COA Microchip Technology, TC07COA Datasheet - Page 10

• Manufacturer Part Number: TC07COA
• Description: IC TEMP SENSR 3V PROGBL 8SOIC
• Manufacturer: Microchip Technology

Specifications of TC07COA

• Sensing Temperature: 0°C ~ 70°C
• Output Type: Digital
• Voltage - Supply: 2.7 V ~ 5.5 V
• Accuracy: ±1°C
• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Full Temp Accuracy: +/- 1 C
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification

Analog-to-Digital Converters
MCP3901 ADC Evaluation Board for 16-bit MCUs
(MCP3901EV-MCU16)
MCP3421 Battery Fuel Gauge Demo Board
(MCP3421DM-BFG)
This board demonstrates how to measure the battery voltage
and discharging current using the MCP3421. The MCU
algorithm calculates the battery fuel being used.
MCP355X Tiny Application Sensor Demo Board
(MCP355XDM-TAS)
This 1˝x 1˝ board is designed to demonstrate the
performance of the MCP3550/1/3 devices in a simple
low-cost application. The circuit uses a ratiometric sensor
confi guration and uses the system power supply as the
voltage reference. The extreme common mode rejection
capability of the MCP355X devices, along with their excellent
normal mode power supply rejection at 50 and 60 Hz, allows
for excellent system performance.
CAN & LIN Interface Products
MCP2515 PICtail™ Plus Daughter Board
(MCP2515DM-PTPLS)
Serial Analyzer tool. The CAN node consists of the MCP2515
stand-alone CAN controller and MCP2551 CAN transceiver.
The PICkit Plus and PICkit Serial connectors allow the board
to be interfaced to a variety of PIC MCUs so that the user
can develop a CAN node.
MCP2515 CAN Bus Monitor Demo Board
(MCP2515DM-BM)
The MCP2515 CAN Bus Monitor demo board kit contains two
identical boards which can be connected together to create
a simple two node Controller Area Network (CAN) bus, which
can be controlled and/or monitored via the included PC
interface. The board(s) can also be connected to an existing
CAN bus.
PICDEM™ CAN-LIN Demo Board
This demo board supports: 28-pin SDIP PIC18F258
and PIC18F268X devices, 40-pin PDIP PIC18F458 and
PIC18F468X devices and 20-pin PDIP PIC16C432 with
integrated LIN Bus transceiver.
Analog Development Tools
10
This evaluation board for 16-bit MCUs
provides the ability to evaluate the
performance of the MCP3901 Dual Channel
ADC. It also provides a development platform
for 16-bit PIC MCU based applications.
This daughter board is a simple Controller
Area Network (CAN) board designed to be
used with boards containing the PICtail Plus
connector. The board also has the PICkit
Serial connector for interfacing to the PICkit
Quick Guide to Microchip Development Tools
(DM163011)
Digital Potentiometers
MCP402X Non-Volatile Digital Potentiometer
Evaluation Board
a “windowed” potentiometer using a 2.5 kΩ pull-up and a
2.5 kΩ pull-down resistor. The PCB supports the 8-pin SOIC,
SOT-23-6 and SOT-23-5 package variations. The unpopulated
PCB allows user’s to build the exact combination of
components their application requires.
MCP42XX PICtail™ Plus Daughter Board
(MCP42XXDM-PTPLS)
This daughter board is used to demonstrate the operation
of the MCP42XX Digital Potentiometers. The operation of
the MCP41XX devices is similar to the MCP42XX devices.
Therefore, this demo board can be used as a development
platform for either device family. This board is designed to
be used in conjunction with either the PIC24 Explorer 16
demo board or the PICkit Serial Analyzer.
Digital-to-Analog Converters
MCP4725 PICtail™ Plus Daughter Board
(MCP4725DM-PTPLS)
MCP4728 Evaluation Board
This evaluation board allows quick and easy evaluation of
the MCP4728 4-channel 12-bit DAC device. It contains the
MCP4728 device and connection pins for Microchip's PICkit
Serial Analyzer. Connect the MCP4728 evaluation board to
the PICkit Serial Analyzer and enter the DAC input data in the
PC Graphical User Interface program. The serial analyzer then
sends the user's data to the DAC device automatically.
Energy Meters
MCP3905A Energy Meter Reference Design
(MCP3905RD-PM1)
specified with an energy measurement error of 0.1% typical
across 1:500 dynamic range for high accuracy energy meter
designs. The board is compliant with EMC requirements per
energy metering standards IEC62053 and legacy IEC61036,
IEC1046 and IEC687.
ifi d i h
This daughter board demonstrates the
MCP4725 (12-bit DAC with non-volatile
memory) features using the Explorer 16
development board and the PICkit Serial
Analyzer.
This low-cost board demonstrates the features
of the MCP401X and MCP402X devices. Kit
includes one populated and one unpopulated
PCB. The populated board has an MCP4021-
103E/SN digital potentiometer configured as
This low-cost energy meter board acts as a
stand-alone energy meter or as the analog-
front-end design for LCD microcontroller-
based meters. The MCP3905A design is
(MCP402XEV)
(MCP4728EV)