D6B-2P Omron, D6B-2P Datasheet - Page 3

• Manufacturer Part Number: D6B-2P
• Description: SENSR TILT 35-65DEG 1MA SMD GUL
• Manufacturer: Omron
• Series: D6Br

Specifications of D6B-2P

• Mounting Type: Surface Mount, Gull Wing
• Operating Angle: 35° ~ 65°
• Operating Temperature: -10°C ~ 60°C
• Voltage - Supply: 2.7 V ~ 3.3 V
• Current - Output: ±1mA
• Package / Case: 4-SMD
• Peak Reflow Compatible (260 C): No
• Supply Voltage: 3.3VDC
• Must Break Angle: 75°
• Must Make Angle: 45°
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: D6B2P; Z2506; Z2506; Z2506TR

Precautions
• The Sensor does not use any materials detrimental to the ozone
• Specifications other than the electrical or mechanical characteris-
■ Handling Precautions
Operating Environment
• The Sensor consists of a Hall IC and a magnet. Check that the
• Do not install any magnetic materials within 2 mm of the Sensor,
• Do not apply any voltage exceeding 5V to the Sensor, else the Sen-
• Do not wash the Sensor after the Sensor is soldered.
• Do not mount or dismount the Sensor while power is flowing to the
• The Sensor may generate error signals if impacted at a minimum
Tape Packing
■ Reel Dimensions
Note: 1. This packing conforms to standard of EIAJ.
layer.
tics, external dimensions, or mounting dimensions of the Sensor
are subject to change without notice.
Sensor in operation will not be influenced by any external magnetic
fields.
else the performance characteristics of the Sensor may not be
guaranteeable. If there are any objects (e.g., motors and solenoids)
generating magnetic fields near the Sensor, operate and test the
Sensor before the Sensor comes into actual use.
sor may break.
Sensor.
acceleration of 294 m/s
2. Quantity per reel: 2,000 pieces.
3. Each reel is packaged within a sealed bag to protect the sensor from the effects of moisture and humidity. In order to maintain optimal
solderability and performance, after the bag’s seal is broken, ensure that storage conditions do not exceed 30°C, 80% RH and that reflow
soldering/assembly occurs within two months.
2
.
• The Sensor may generate error signals if a vibration at a minimum
• Confirm that no static electricity at a maximum voltage of 5kV is
Operating Characteristics
The present output may stay unchanged if the inclination of the Sen-
sor back and forth is 20° or more. Under that condition, the output
might not change even when the Sensor is leaned left or right.
(Example)
frequency of 15 Hz and a minimum acceleration of 15m/s
applied to the Sensor.
applied to the pins, else the Sensor may break.
Direction
of gravity
If the Sensor is kept inclined back or forth as shown in the above
illustration, the level of output might not change from high to low or low to
high when the Sensor inclines left or right.
Micro Tilt Sensor
20 min.
D6B
20 min.
2
3
is