4233-9 Pomona Electronics, 4233-9 Datasheet - Page 2

• Manufacturer Part Number: 4233-9
• Description: MICROGRABBER D-I-Y 10/PKG WHITE
• Manufacturer: Pomona Electronics
• Series: 4233r
• Type: Micrograbber®r

Specifications of 4233-9

• Color: White
• Hook Type: Hook
• Hook, Pincer Opening: 0.060" (1.52mm)
• Length: 1.710" (43.43mm)
• Termination: Solder, 0.090" (2.29mm) Wire Opening
• Equipment Type: Test Clip Kits
• Current Rating: 3A
• Overall Length: 43.43mm
• Connector Type: Test Clip
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 6625011130862

Pomona
FIGURE #1
A. Remove the cap from housing assembly, the
B. Insert the wire into the cap assembly allowing
C. Strip wire 1/8 to 3/16 inches.
D. Insert exposed conductor through the hole in
FIGURE #2
E. Important: Solder must not extend beyond the
FIGURE #3
F.
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
10/1/07
D1094088
Rev. 100
contact will now be exposed.
approximately 1 to 2 inches of wire to extend
beyond the cap.
the contact and solder to surface.
indicated width.
Install the cap onto the housing assembly.
Align the contact with the slots located on the
cap.
®
Model 4233 with Assembly Instructions
Do-It-Yourself Micrograbber®
& Test Clip Kits
Technical Support: [e-mail]
Sales: 800-490-2361 Fax: [phone]
www.pomonaelectronics.com
Page 2 of 2