G2RL-1E 48DC Omron, G2RL-1E 48DC Datasheet - Page 5

• Manufacturer Part Number: G2RL-1E 48DC
• Description: RELAY, PCB, SPCO, 48VDC
• Manufacturer: Omron

Specifications of G2RL-1E 48DC

• Relay Type: Power
• Coil Voltage Vdc Nom: 48V
• Contact Current Max: 16A
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 24V
• Coil Resistance: 5.358kohm
• Coil Type: DC Coil, Sensitive
• Coil Current: 8.96mA
• Nom: RoHS Compliant
• Contact Configuration: SPCO
• Rohs Compliant: Yes

Cat. No. J117-E1-2
OMRON Corporation
Electronics Components Company
C&C Components Division H.Q.
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: [phone]/Fax: [phone]
G2RL
Precautions
Basic Information
Before actually committing any component to a mass-production
situation, OMRON strongly recommends situational testing, in as
close to actual production situations as possible. One reason is to
confirm that the product will still perform as expected after surviving
the many handling and mounting processes involved in mass pro-
duction. Also, even though OMRON relays are individually tested a
number of times, and each meets strict requirements, a certain test-
ing tolerance is permissible. When a high-precision product uses
many components, each depends upon the rated performance
thresholds of the other components. Thus, the overall performance
tolerance may accumulate into undesirable levels. To avoid prob-
lems, always conduct tests under the actual application conditions.
8
G2RL-1-E, G2RL-14-E
* Indicates average
* Indicates average
G2RL-2, G2RL-24
* Indicates average
G2RL-2A, G2RL-2A4
dimensions.
dimensions.
dimensions.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
Terminal Arrangement/
Internal Connection
(Bottom View)
Terminal Arrangement/
Internal Connection
(Bottom View)
Terminal Arrangement/
Internal Connection
(Bottom View)
General
To maintain the initial characteristics of a relay, exercise care that it
is not dropped or mishandled. For the same reason, do not remove
the case of the relay; otherwise, the characteristics may degrade.
Avoid using the relay in an atmosphere containing sulfuric acid
(SO
continuously apply a voltage higher than the rated maximum volt-
age to the relay. Never try to operate the relay at a voltage and a cur-
rent other than those rated.
Do not use the relay at temperatures higher than that specified in the
catalog or data sheet.
8
1
8
1
8
1
2
), hydrogen sulfide (H
2
7
7
2
3
3
6
6
6
3
4
5
4
5
4
5
2
S), or other corrosive gases. Do not
Mounting Holes
(Bottom View)
Mounting Holes
(Bottom View)
Mounting Holes
(Bottom View)
Printed in Japan
0301-1.5M (0999) (O)
Eight, 1.3 0.1 dia.
holes
Eight, 1.3 0.1 dia.
holes
Six, 1.3 0.1 dia.
holes
(2.5)
G2RL
(2.5)
(2.5)