OPEJ5 BANNER ENGINEERING, OPEJ5 Datasheet
OPEJ5
Specifications of OPEJ5
Related parts for OPEJ5
OPEJ5 Summary of contents
Page 1
LR41887-17 E71083 Sensor Head Sensing Mode Models 45 m (150‘) OSEE, OSER Response ON/OFF OPPOSED Repeatability: 0.4 ms 450 mm (18’’) OSED Response ON/OFF DIFFUSE Repeatability WARNING . . . Not To Be ...
Page 2
... Convergent Mode 2.4 mm 1 0.8 mm 1 37.5 mm 0.50 in 1 100 mm 1000 mm DISTANCE . DISTANCE Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 3.0 in 2 1.0 in 2.0 in 3.0 in 1.6 m 2.0 m 5.0 ft 6.25 ft 6.0 in 4 2.0 in 4 ...
Page 3
... GLASS FIBER Diffuse Mode PLASTIC FIBER Opposed Mode See Excess Gain curves OSEFP Response ON/OFF Repeatability PLASTIC FIBER Diffuse Mode Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 E Series OMNI-BEAM™ Sensors Models, continued Range Beam Excess Gain 1000 E X ...
Page 4
... E Series opposed mode emitters use an emitter power block, either model OPEJE or OPEJEQD. All other E Series sensors use either model OPEJ5 or OPEJ5QD*. Models OPEJE and OPEJ5 have a 1/2’’ NPS integral internal conduit thread and are supplied with a 6-foot PVC-covered cable. Models OPEJEQD and OPEJ5QD (“QD” models) have NEMA 4-rated quick-disconnect Mini-style connectors. All models are housed in tough, molded PBT housings ...
Page 5
... Application caution - Power block models OPEJ5(QD) and OPEJE(QD) Power block modules OPEJ5(QD) and OPEJE(QD) use "partial phase firing" power conversion to enable their wide range of ac input voltage (24 to 250V ac). AC power is applied to the sensor for only a small portion of each ac half- cycle ...
Page 6
... OFF-DELAY 1 second maximum ON-DELAY 1 second maximum OFF-DELAY 15 seconds maximum ON-DELAY 15 seconds maximum OFF-DELAY 1 second maximum ON-DELAY 15 seconds maximum OFF-DELAY 15 seconds maximum Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 Slide in Switch Positions # OFF OFF OFF OFF ON OFF ...
Page 7
... NOTE 3: with switches #1 and #2 “off” (no DELAY programmed), DELAY is adjustable from “negligible” (4.5*) milliseconds, maximum. Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 E Series OMNI-BEAM™ Sensors Overview, continued Logic Function and Timing Ranges: ...
Page 8
... Temperature: 0° to +50° C (+32° to +122° F). Temperature for Plastic Fiber Optics: −30° to +70° C (−20° to +158° F) Certifications 8 P/N 03540 rev. C Configuration Specifications E71083 LR41887-17 ® LIGHT/DARK switch LO DO Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 ...
Page 9
... Depth of model OSELVAG is 57.7 mm (2.27’’) ** Depth of model OSECV is 62.0 mm (2.44’’) Style Model MBCC-506 Mini-style 5-pin, MBCC-512 straight connector MBCC-530 Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 E Series OMNI-BEAM™ Sensors Dimensions Model OSEFX Quick-Disconnect Cordsets Length Dimensions 61 mm max. ...
Page 10
... E Series OMNI-BEAM™ Sensors WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products ...