XS3P-M421-1 Omron, XS3P-M421-1 Datasheet - Page 12
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
XS3P-M421-1
Manufacturer Part Number
XS3P-M421-1
Description
SOCKET, M8, FRT/REAR LOCK, DIP PINS
Manufacturer
Omron
Datasheet
1.XS3F-E421-402-A.pdf
(12 pages)
Specifications of XS3P-M421-1
Svhc
No SVHC (15-Dec-2010)
Connector Type
DIP Pins
Connector Type A
M8 Screw
Contact Resistance
40mohm
Current Rating
1A
Ip/nema Rating
IP67
No. Of Ways
4
Operating Temperature Max
70°C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Safety Precautions
Do not use the product in atmospheres or environments that
exceed product ratings.
Connections
Connector Connection and Disconnection
• The XS3 and XS2 Sensor I/O Connectors cannot be
• When using Sensors with Connectors or Limit Switches,
• Do not connect M8 screw models and S8 snap-in models
• Before connecting or disconnecting Connectors, make sure
• When connecting or disconnecting Connectors, be sure to
• Do not touch the engagement side of any Connector with
• Make sure that engagement side of any Connector is free of
• Do not use pliers to tighten mounting the thread bracket,
• Fully insert S8 snap-in models until the Connectors are
connected to each other.
use the Sensor I/O Connectors specified in the catalog.
together, otherwise the proper degree of protection of the
Connectors will not be maintained.
that no power is being supplied to the Connectors.
hold the Connectors by hand. Do not disconnect the
Connectors by pulling the cable.
wet hands. If there is any water on the Connector or near
the Connector, be sure to wipe off the water before
connecting or disconnecting the Connector, otherwise the
Connector may short-circuit internally or not ensure good
insulation.
metal dust or power.
otherwise the thread bracket may be damaged. Be sure to
tighten each thread bracket by hand within a torque of
0.2 N·m. If the thread bracket is not tightened securely, the
Connector may not maintain its proper degree of protection
or the thread bracket may fall off due to vibration.
hidden by the metal casing of the opposite parts, otherwise
the Connectors will not maintain their proper degree of
protection or the thread brackets may become loose due to
vibration.
Precautions for Correct Use
Cable Wire Color
Degree of Protection
Storage
Do not store Connectors for long periods of time in the
following locations
Installation
• The M8/S8 Sensor I/O Connectors use the following lead
• Do not impose external force continuously on the joints of
• Connectors are not fully watertight. Do not use them
• The Connectors are not oil-resistant. Do not use them
• If Connectors are used in places with vibration or shock,
• Connectors are of resin mold construction. Do not impose
• Locations subject to dust or high humidity
• Locations subject to ammonia gas or sulfide gas
• Do not make any cable bends near the base of the Unit.
• Any bends made must have a minimum radius of 36 mm.
For DC
wire colors.
pin blocks and covers, otherwise the Connectors may not
keep its proper degree of protection (i.e., IP67).
underwater.
where they would be subject to oil.
secure the engaged side of each Connector, otherwise the
Connectors may be disconnected or fail to maintain their
proper degree of protection.
excessive force on them.
Model
8-mm-dia. DC4
Brown
1
White
2
Pin No.
Blue
3
XS3
Black
4
12