CCARPG01 Red Lion Controls, CCARPG01 Datasheet - Page 3

• Manufacturer Part Number: CCARPG01
• Description: SENSOR CABLE, 6POS, 10FT
• Manufacturer: Red Lion Controls

Specifications of CCARPG01

• Cable Length: 10ft
• Connector Type B: Stripped End Lead
• Connector Type A: 6 Pin Connector
• Cable Assembly Type: Sensor
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

LENGTH SENSOR CONVERSION BRACKET (P/N LSCB1000)
the RPGB is 6.8" similar to the LSQ. The 10´ long, 4-wire, shielded cable
(included with conversion bracket) has the same color coding as described for
the RPGB cable P/N CCARPG01. Screws for mounting the conversion bracket
to the RPGB are included.
ORDERING INFORMATION
LENGTH SENSOR ACCESSORIES
SEPARATE LENGTH MEASURING WHEELS - DIMENSIONS In Inches (mm)
SELECTING APPROPRIATE WHEEL SIZE & PPR (Pulses Per Rev.) OF ROTARY PULSE GENERATOR
or inch units, selection of the proper combination is relatively straight forward.
For example, with a 1-foot wheel circumference, a 1 PPR Rotary Pulse
Generator will deliver 1 pulse/ft, 12 PPR would deliver 12 pulses/ft (1
pulse/inch); 100 PPR would yield 100 pulses/ft; and 120 PPR would permit
measuring to 1/10th of an inch (1/120th of a foot).
WHEEL
MODEL NO.
CODE
The tubular arm length of this bracket, related to the wheel axis center-line of
When the desired output of an RPG and wheel combination is either in feet
LSCB
--
ADAPTS RPGB ROTARY PULSE GENERATOR TO LENGTH MEASUREMENT
OR
Length Sensor Conversion Bracket for RPGB
Length Sensor Conversion Bracket for RPGB
(Special Length)
Hinge Clamp Assembly for Model LSC &
Conversion Bracket (Above)
FOR USE ON: Metal, paper,
foil, film and hard plastics.
Line contact on material
being measured,
convenient when available
measuring track is narrow
or for measuring on end of
roller beside passing
material.
Max. Speed: 600 RPM
DESCRIPTION
WHEEL
CODE
PART NUMBER
LSCB1000
LSCB1099
LSAHC001
OF
3
FOR USE ON: Soft, smooth
Max. Speed: 600 RPM
Balanced version of 1ft.
circumference available.
Balanced to ANSI S2.19-
1989 Quality Grade 6.3 @
3000 RPM.
LENGTH SENSOR MEASUREMENT ACCURACY
accuracy and wear, and material conditions. Ideally, materials which are hard,
thin and strong provide good readings, conversely, soft, thick and elastic
materials can present problems in obtaining true readings. The great majority of
these situations, where this effect is consistant, can be compensated for by
applying a multiplier to the quadrature output pulse train so as to obtain a
corrected measurement. Counter or Rate Indicators with “input scaling” can
compensate for Measuring Wheel wear and material elastic and compliance
errors. In addition, English/Metric conversions may also be accomplished (See
RLC catalog for more information).
or 1-meter circumference wheel would be prohibitively large. Instead, 4/10 yard
and 4/10 meter wheels can be used in conjunction with RPGB.
!
QUADRATURE
!
DESCRIPTION
sensor by purchasing the following items separately.
1. Length Sensor Conversion Bracket (P/N LSCB1000)
2. RPGB with appropriate PPR and Single Channel or Quadrature Output.
3. One or two measuring wheels. Install OF & OK measuring wheels with set
screw hub facing RPGB shaft (as shown). Apply thread locking material to
wheel set screw threads during installation to RPGB shaft.
4. Hinge Clamp Assembly (P/N LSAHC001)
Note: To complete installation, insure guards, shields or other devices are in
place to protect personnel from rotating equipment.
materials such as soft
paper, matting,
cardboard, fine weave
textiles. Broad wheel
tread minimizes contact
pressure and tan
polyurethane tread
minimizes marking.
Factors which affect measurement accuracy include Measuring Wheel
FOR BI-DIRECTIONAL MOTION APPLICATIONS REQUIRING
FOR FINE RESOLUTION, HIGH-PULSE-RATE APPLICATIONS
Measuring in yards or meters, however, is a bit more involved since a 1-yard
This conversion bracket allows the customer to assemble a custom length
WHEEL
CODE
OK
FOR USE ON: Rubber,
Max. Speed: 600 RPM
Balanced version of 1ft.
circumference available.
Balanced to ANSI
S2.19-1989 Quality
Grade 6.3 @ 3000
RPM.
coarse weave fabrics,
rough wood surfaces,
foam, insulation.