Q45VR3FV BANNER ENGINEERING, Q45VR3FV Datasheet - Page 7

• Manufacturer Part Number: Q45VR3FV
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Photoelectric Sensorr

Specifications of Q45VR3FV

• Sensor Output: Relay
• Sensor Housing: Rectangular
• Sensor Input: Fiber Optic
• Output Type: Relay
• Switch Terminals: Cable
• Fiber Optic Sensor Type: Photoelectric Sensor

Supply Voltage and Current
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
Repeatability
Adjustments
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Application Notes
Certifications
Supply Protection Circuitry
www.bannerengineering.com • Tel: [phone]
Banner Engineering Corp.
•
Minneapolis, U.S.A.
Universal voltage: 24 to 250V ac, 50/60 Hz or 12 to 250V dc (1.5 watts maximum)
Protected against transient voltages. DC hookup is without regard to polarity.
SPDT (Single-Pole, Double-Throw) electromechanical relay output. All models except emitters.
Max. switching power (resistive load): 1250VA, 150W
Max. switching voltage (resistive load): 250V ac, 125V dc
Max. switching current (resistive load): 5A @ 250V ac, 5A @ 30V dc derated to 200 mA @ 125V dc
Min. voltage and current: 5V dc, 10mA
Mechanical life of relay: 50,000,000 operations
Electrical life of relay at full resistive load: 100,000 operations
Protected against false pulse on power-up
15 milliseconds ON and OFF
(NOTE: 100 millisecond delay on power-up. Relay is de-energized during this time.)
Opposed mode: 0.25 milliseconds
All other sensing modes: 0.5 milliseconds
Response time and repeatability specifications are independent of signal strength.
Light/Dark Operate select switch; and multi-turn Sensitivity control on top of sensor beneath a transparent
o-ring-sealed Lexan
and logic/display modules have adjustable timing functions (see page 10).
Indicator LEDs are clearly visible beneath a raised transparent Lexan
Power (green) LED lights whenever 24 to 250V ac, or 12 to 250V dc power is applied
Signal (red) AID™ System LED lights whenever the sensor sees its modulated light source, and pulses at a
rate proportional to the strength of the received light signal
Load (yellow) LED lights whenever the output relay is energized
Optional 7-element LED signal strength display module
Molded reinforced thermoplastic polyester housing, o-ring-sealed transparent Lexan
lenses, and stainless steel hardware. Q45s are designed to withstand 1200 psi washdown. The base of
cabled models has a 1/2" NPS integral internal conduit thread.
NEMA 6P, IEC IP67
PVC-jacketed 2 m (6.5') or 9 m (30') unterminated cables, or Mini-style quick-disconnect (QD) fittings are
available (“Q”- suffix models). QD cables are ordered separately. See page 10.
Temperature: -25° to +55° C (-13° to +131°F)
Maximum relative humidity: 90% at 50°C (non-condensing)
Transient suppression is recommended for contacts switching inductive loads.
Optional output timing modules are available. See page 10 for more information.
Lexan
®
is a registered trademark of General Electric Co.
Q45VR3 Series Specifications
®
cover, allows precise sensitivity setting (turn clockwise to increase gain). Optional logic
®
dome on top of the sensor.
Q45VR3 Series
®
cover, molded acrylic
page
7