QS30LLP BANNER ENGINEERING, QS30LLP Datasheet - Page 4

• Manufacturer Part Number: QS30LLP
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Retroreflectiver

Specifications of QS30LLP

• Sensing Range: 0.2m To 18m
• Output Current: 150mA
• Sensor Output: NPN/PNP
• Supply Voltage Range Dc: 10V To 30V
• Sensor Housing: Rectangular
• Sensing Range Min: 0.2m
• Sensor Input: Laser
• Body Material: ABS Plastic
• Brand/series: QS30
• Cable Type: 2 m, 5 Wire Cable
• Current, Switching: 150 mA
• Function: Proximity
• Ip Rating: IP67
• Light Source: LED
• Material, Housing: ABS Plastic
• Mounting Type: Threaded
• Output: NPN/PNP
• Primary Type: Photoelectric
• Range, Measurement: 18 m
• Repeatability: 70 ms
• Response Time: 500 ms
• Sensing Mode: Retro-Reflective
• Standards: CE Marked
• Technology: Photoelectric
• Temperature, Operating: -10 to +50 °C
• Termination: Cable
• Voltage, Supply: 10-30 VDC
• Lead Free Status / Rohs Status: RoHS Exempt Product

WORLD-BEAM
The distance to the target is sampled; the sensor places the cutoff point at
approximately 105 percent of the distance to the target. In RUN mode, objects located
between the minimum range and the cutoff are sensed; anything beyond the cutoff
(e.g., other objects or background surfaces) is ignored.
Minimum range varies, depending on the cutoff distance and reflectivity
(see Figure 11).
*Segments 7 and 8 simultaneously flashing: Indiscernible target; sensor defaults to maximum cutoff.
• Click the push buttons (“+” or “-”) to adjust the cutoff by approximately 2 percent.
• The display will momentarily blink to acknowledge cutoff movement.
• If the cutoff is at an extreme, the “far” (7th and 8th) or “near” (1st and 2nd)
4
Segments 1 and 2 simultaneously flashing: Cutoff set is nearer than minimum cutoff; sensor defaults to minimum cutoff.
- To suppress background more, click Background button.
- To increase object detection, click Object button.
bargraph segments will flash simultaneously to indicate that the cutoff did not
adjust.
P/N 111384 rev. D
• Present target object.
• Press and hold Object (-)
• Sampling continues until
push button > 2 seconds
(until indicators flash).
the push button is released;
then sensor returns
automatically to
RUN mode.
Push Button
®
Object Detection SET
QS30AF Adjustable-Field Sensor
Manual Adjust
T
T
• Present target object.
• Double-pulse the remote line.
• Sensor returns automatically to RUN
> 2 seconds
mode.
0.04 seconds ≤ T ≤ 0.8 seconds
T T T
T
T
Remote
T
T
T
T
T
T
T
T
Banner Engineering Corp.
www.bannerengineering.com • Tel: [phone]
Figure 4. Object Detection SET
• Indicator segments
• Cutoff accepted: Sensor returns directly
• Cutoff beyond sensor range: Feedback
5 and 6 alternately
flash.
to RUN mode.
is displayed for 2 seconds
(see page 6).*
Minimum
Range
Objects in this area are sensed
•
Sensing Distance (D)
Minneapolis, MN U.S.A.
Result
Sensing Distance
Approx. 5% of
Cutoff