VS3RN5XLP BANNER ENGINEERING, VS3RN5XLP Datasheet - Page 2

• Manufacturer Part Number: VS3RN5XLP
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of VS3RN5XLP

• Output Current: 50mA
• Sensor Output: NPN DO
• Supply Voltage Range Dc: 10V To 30V
• Contact Current Max: 50mA
• Switch Terminals: Cable
• Peak Reflow Compatible (260 C): No
• Sensor Input: Optical
• Output Type: Transistor
• Body Style: Rectangular
• Brand/series: VS3
• Current, Switching: 50 mA
• Dimensions: 1.00" L × 0.35" W × 0.61" D
• Function: Proximity
• Indicator: Green LED And Yellow LED
• Ip Rating: IP67
• Light Source: LED
• Material, Body: Black ABS (Housing)
• Material, Cover: Acrylic
• Material, Lens: Glass
• Mounting Type: Bracket
• Output: NPN
• Primary Type: Photoelectric
• Range, Measurement: 10 In.
• Response Time: 1 mSec. ON and OFF
• Sensing Mode: Polarized Retro-Reflective
• Standards: CE Approved
• Technology: Photoelectric
• Temperature, Operating: -20 to +55 °C
• Termination: Cable
• Voltage, Supply: 30 VDC
• Operating Temperature: –20°C to 55°C
• Sensing Range Max: 250mm
• Lead Free Status / Rohs Status: RoHS Exempt Product

VS3 Series Retroreflective Mode
VS3 Series miniature self-contained sensors are designed for retroreflective sensing
in small areas previously accessible only to remote or fiber optic models. Typical
applications include mounting on small feeder tracks, packaging machines, and
conveyors, where larger sensors will not fit.
The coaxial optics of the VS3 allow the retroreflective target to be placed as close to
the sensor lens as needed – there is no “blind” response area, as is typical of most
retroreflective sensors. The VS3 is supplied with a Banner model BRT32X20AM
retroreflective target (see right). The specifications shown on page 1 assume use of
this target.
Other retroreflective materials may be substituted. For example, using the standard
BRT-3 target, the range becomes 400 mm (16"); standard BRT-THG retroreflective
tape yields a 150 mm (6") range. Contact Banner Engineering for sensing
performance when using other retroreflective targets.
page
Supply Voltage and Current
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
Repeatability
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Vibration and
Mechanical Shock
Application Notes
Certifications
Supply Protection Circuitry
2
VS3 Series Overview
1 millisecond ON and OFF
10 to 30V dc (10% maximum ripple) at less than 25 mA (exclusive of load)
Protected against reverse polarity and transient voltages
SPST solid-state switch
Choose NPN (current sinking) or PNP (current sourcing) models
Choose light operate (N.O.) or dark operate (N.C.) models
50 mA maximum
OFF-state leakage current: < 1 microamp at 24V dc
ON-state saturation voltage: < 0.25V at 10 mA dc; < 0.5V at 50 mA dc
Protected against false pulse on power-up and continuous overload or short circuit of outputs
Overload trip point ≥ 100 mA
(NOTE: 150 millisecond delay maximum on power-up: output does not conduct during this time)
160 microseconds
Two LEDs: Green and Yellow
XLV Models: Black ABS housing with acrylic lens
XLP Models: Black ABS housing with glass lens and acrylic cover
IEC IP67; NEMA 6
2 m (6.5') attached cable: three #28 ga stranded conductors with PE insulation; PVC outer cable jacket; or
3-pin Pico-style threaded quick-disconnect fitting. QD cables are ordered separately.
Temperature: -20° to +55°C (-4° to +131°F)
Maximum Relative Humidity: 80% at 50°C (non-condensing)
Vibration: All models meet IEC 60068-2-6, IEC 60947-5-2, UL491 Section 40, MIL-STD-202F Method 201A;
Shock: All models meet IEC 60068-2-27, IEC 60947-5-2; 30g peak acceleration, 11 millisecond pulse
M3 stainless steel mounting hardware included. Optional mounting brackets are available (page 4).
duration, half-sine wave pulse shape
Green ON steady: power to sensor is ON
Green flashing: output overload
Yellow ON steady: light is sensed
10 to 60 Hz, 0.5 mm peak to peak
VS3 Series Specifications
www.bannerengineering.com • Tel: [phone]
Banner Engineering Corp.
Figure 1. Retroreflective target, model
32 mm
(1.1")
Maximum Temperature: 65°C (150°F)
26 mm
(1.0")
BRT-32X20AM (supplied with
each sensor)
20 mm
ø3.5 mm
(0.8")
(0.14")
•
Minneapolis, U.S.A.
20 mm
(0.8")
3.0 mm
(.12")
2.0 mm
(0.08")