Q12RB6FF15 BANNER ENGINEERING, Q12RB6FF15 Datasheet - Page 10

• Manufacturer Part Number: Q12RB6FF15
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of Q12RB6FF15

• Output Current: 50mA
• Sensor Output: NPN/PNP DO
• Supply Voltage Range Dc: 10V To 30V
• Sensor Housing: Rectangular
• Wavelength Typ: 640nm
• Response Time: 1.3ms
• Sensing Range Min: 10mm
• Sensor Input: Optical

Opposed-mode Q12 sensors (standard models only) may be fitted with apertures to narrow or shape the sensor’s
effective beam to more closely match the size or profile of the objects being sensed. A common example is the use
of “line” (or “slot”) type apertures to sense thread.
NOTE: The use of apertures will reduce the sensing range (see table below).
APQ12-.5
APQ12-1
APQ12-1.5
APQ12-2
APQ12-.5H
APQ12-1H
APQ12-.5V
APQ12-1V
APQ12-4S
APKQ12
This product does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or denergized sensor output condition.
Consult your Banner Safety Products catalog for safety products that meet OSHA, ANSI and IEC standards for
personnel protection.
Model
Kit containing two of each aperture above – 18 total
Protective jacket
Horizontal slot
Circular hole
Vertical slot
WARNING . . . Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so
could lead to serious injury or death
Description
Warranty: Banner Engineering Corp. will repair or replace, free of charge, any product
of its manufacture found to be defective at the time it is returned to the factory during
the warranty period. This warranty does not cover damage or liability for the improper
application of Banner products. This warranty is in lieu of any other warranty either
Apertures
0.5 mm (0.02") diameter – 10 each
1 mm (0.04") diameter – 10 each
1.5 mm (0.06") diameter – 10 each
2 mm (0.08") diameter – 10 each
0.5 mm (0.02") – 10 each
1 mm (0.04") – 10 each
0.5 mm (0.02") – 10 each
1 mm (0.04") – 10 each
4 mm (0.16") square – 10 each
Reduced Sensor Range
60 mm (2.4")
190 mm (7.5")
400 mm (15.7")
725 mm (28.5")
350 mm (13.8")
725 mm (28.5")
450 mm (17.7")
900 mm (35.4")
2000 mm (78.7")
(Two Apertures Used)
expressed or implied.
—