55016 Measurement Specialties Inc., 55016 Datasheet - Page 19

• Manufacturer Part Number: 55016
• Description: EPOXY NTC THERMISTOR
• Manufacturer: Measurement Specialties Inc.

Specifications of 55016

• Thermistor Type: NTC
• Resistance: 10kohm
• Beta Value (k): 3891K
• Operating Temperature Range: -80°C To +200°C
• Thermistor Case Style: Radial Lead
• No. Of Pins: 2

Specifications
YSI 44018 Thermilinear Composite
Maximum Operating Temperature: 105°C (220°F)
Accuracy and Interchangeability: ±0.15°C when incorporated in a standard YSI
Thermilinear Network.
Time Constant, Maximum: 1 sec in well-stirred oil, 10 sec in still air. Time constant is
the time required for thermistor to indicate 63% of a newly impressed temperature.
Dissipation Constant, Minimum: 8mW/°C in well stirred oil, 1mW/°C in still air.
Dissipation constant is the power in milliwatts required to raise a thermistor 1°C
above surrounding temperature.
Color Code: Black epoxy body; red, green, and brown leads.
Storage Temperature: -80 to +105°C (-112 to +221°F).
Resistor Sets: 44301, 0° to +100°C (+32° to +212°F)
YSI 44019A Thermilinear Composite
Maximum Operating Temperature: 85°C (185°F). Not recommended for long-term
continuous use above 50°C (122°F).
Accuracy and Interchangeability: ±0.4°C (0 to 85°C); ±0.8°C (0 to -55°C) when
incorporated in a YSI Thermilinear Network.
Time Constant Maximum: 1 sec in well-stirred oil, 10 sec in still air. Time constant is
the time required for thermistor to indicate 63% of a newly impressed temperature.
Dissipation Constant, Minimum: 8 mW/°C in well-stirred oil, 1 mW/°C in still air.
Dissipation constant is the power in milliwatts to raise a thermistor 1°C above
surrounding temperature.
Color Code: Black epoxy body; red, green, and brown leads.
Storage Temperature: -80 to +50°C (-112 to +122°F).
Resistor Set: 44311A, -55° to +85°C (-67° to +185°F)
YSI 44020 Thermilinear Composite
Maximum Operating Temperature: 55°C (131°F)
Accuracy and Interchangeability: ±0.1°C when in a YSI Thermilinear Network.
Time Constant, Maximum: 1 sec in well-stirred oil, 10 sec in still air. Time constant is
the time required for thermistor to indicate 63% of a newly impressed temperature.
Dissipation Constant, Minimum: 8 mW/°C in well-stirred oil, 1 mW/0°C in still air.
Dissipation constant is the power in milliwatts to raise a thermistor 1°C above
surrounding temperature.
Color Code: Black epoxy body; red, green, blue, and brown leads.
Storage Temperature: -80 to +120°C (-112 to +250°F).
Resistor Set: 443012, -50° to +50°C (-58° to +122°F)
44302, -5° to +45°C (+23° to +113°F)
44303, -30° to +50°C (-22° to +122°F)
44304, -2° to +38°C (+28° to +100°F)
YSI 44000 Series
Thermilinear Components
Temperature Tip
Linearization of
Thermistors
Thermistors have an
exponential non-linear
resistance curve. Over small
ranges of temperature,
linearization is achieved
with a single resistor.
Patented YSI Thermilinear
components use multiple
thermistors and fixed
resistors to provide a
linear output over wider
temperature ranges. The
new YSI 4800LC (page 16)
uses microprocessor
technology to provide more
accurate linearization than
was possible with passive
component systems. Refer
to the YSI Precision
Temperature Handbook
for more information on
linearization techniques.
How to Order
Please order from your
YSI representative or
YSI Customer Service.
Call 937 427-1231 ext. 770
™
®