KPEG-651SAN Kingstate Electronics Corp., KPEG-651SAN Datasheet - Page 3

• Manufacturer Part Number: KPEG-651SAN
• Description: BUZZER, FAST PULSE
• Manufacturer: Kingstate Electronics Corp.

Specifications of KPEG-651SAN

• Tones: Fast Pulse
• Resonant Frequency: 2.8kHz
• Sound Level Spl: 74dB
• Sound Level Distance: 30cm
• Colour: Black
• Current Consumption: 10mA
• Current Max: 26mA
• Current Min: 5mA
• Current Rating: 10mA
• External: RoHS Compliant

D. MEASURING METHOD 測量方法
E. MECHANICAL CHARACTERISTICS 機械特性
No.
S.P.L. Measuring Circuit 音壓測試接線圖
Mic : RION S.P.L meter UC30 or equivalent
Mic：RION 噪音計 UC30 或同等品
1
2
3
4
5
Terminal Mechanical
Soldering Heat
Solderability
焊錫附著性
焊錫耐熱性
Resistance
端子強度
振動測試
Drop test
落下測試
Vibration
Strength
Item
志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP 3/5
Lead terminals are immersed in rosin for 5 seconds and then immersed
in solder bath of +270±5℃ for 3±1 seconds.
端子部份浸入松香溶液 5 秒後,再浸入+270±5℃溶融焊鍚槽中 3±1 秒.
距離端子根部 1.5mm 的位置,浸入+300±5℃的焊鍚槽 3±0.5 秒,或+260±5
℃ 的焊錫槽 10±1 秒.
Buzzer shall be measured after being applied vibration of amplitude of
1.5mm with 10 to 55hz band of vibration frequency to each of 3
per-pendicular directions for 2 hours.
振動週波數 10∼55HZ、全振幅 1.5mm 於 X.Y.Z 3 個方向,各 2 小時.
Lead terminal are immersed up to 1.5mm from sounder’s body in soilder
bath of +300±5℃ for 3± 0.5 seconds or +260±5℃ for 10±1 seconds.
The force 10 seconds of 9.8N (1.0kg) is applied to each terminal in axial
direction.
各端子的軸方向施以 9.8N (1.0kg)的力量 10 秒.
The part only shall be dropped from a height of 75cm onto a 40mm thick
wooden board 3 times in 3 axes (X.Y.Z). (a total of 9 times).
單體從 75 公分高處, X.Y.Z.3 個方向,各 3 回,落於 40mm 厚木板上.
Test Condition
KPEG651SAN
90% min. lead terminals shall
be wet with solder. (Except the
edge of terminal)
浸入端子部份附著焊鍚 90%以
上.(末端斷面不算)
No interference in operation
操作上無任何不良
No damage and cutting off
端子不鬆動, 不脫落
The value of oscillation
frequency/ current
consumption should be in 10%
compared with initial ones .The
SPL should be in ± 10dB
compared with initial one.
諧振頻率與消耗電流變化量須
在±10%內. 輸出音壓變化量須
在±10dB 內.
Evaluation standard