E3C-DS10 Omron, E3C-DS10 Datasheet - Page 14

• Manufacturer Part Number: E3C-DS10
• Description: PHOTO DIFFUSE 10CM
• Manufacturer: Omron
• Series: E3Cr

Specifications of E3C-DS10

• Rohs Compliant: YES
• Sensing Distance: 3.937" (100mm)
• Sensing Method: Reflective, Diffuse
• Sensing Object: White Paper
• Output Configuration: -
• Sensing Light: Infrared
• Mounting Type: Bracket Mount
• Current - Supply: -
• Voltage - Supply: -
• Package / Case: Module, Pre-Wired
• Features: Fast Response Time
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

E3C
Connections, continued
Operation
Selection of operation mode
DARK ON
DARK ON
NOTE: 1. Control output is produced only during the input time.
Amplifier
model
E3C-WH4F
Notes
E3C-A Amplifier
2. When t exceeds 1 ms or 2 ms, solid-state output is produced. To produce
relay contact output, t must be longer than 20 ms.
Through-beam type
E3C-S10, E3C-S20W, E3C-S30 , E3C-S50, E3C-1, E3C-2
NOTE: Terminals 5, 6, 7, and 8 are not used when connected to S3D8
or S3D-F sensor controllers.
*Shielded wires must not be peeled in excess of
2 cm (0.787 in) for the receiver (white lead) and 5 cm
(1.969 in) for the light source (red lead).
LIGHT ON
LIGHT ON
When light is incident, the output relay
operates and solid-state output becomes
high (H).
When light is interrupted, the output relay
operates and the solid-state output becomes
high (H).
Sensors
15
E3C-A Timing Chart
Diffuse reflective type
E3C-DS5W, E3C-DS10
NOTE: Terminals 5, 6, 7, and 8 are not used when connected to S3D8
or S3D-F sensor controllers.
*Shielded wires must not be peeled in excess of
2 cm (0.787 in).
Selection of response time
2 msec (B)
2 msec (B)
1 msec (A)
1 msec (A)
The response time is set to 2 ms.
The response time is set to 1 ms.
E3C