FH19C-8S-0.5SH(05) Hirose Electric Co Ltd, FH19C-8S-0.5SH(05) Datasheet - Page 9

• Manufacturer Part Number: FH19C-8S-0.5SH(05)
• Description: CONN FPC/FFC 8POS .5MM SMD GOLD
• Manufacturer: Hirose Electric Co Ltd
• Series: FH19Cr

Specifications of FH19C-8S-0.5SH(05)

• Housing Material: Liquid Crystal Polymer (LCP)
• Voltage Rating: 50V
• Current Rating: 0.500A
• Pitch: 0.020" (0.50mm)
• Connector Type: Bottom Contacts
• Number Of Positions: 8
• Ffc, Fcb Thickness: 0.20mm
• Height Above Board: 0.036" (0.90mm)
• Mounting Type: Surface Mount, Right Angle
• Cable End Type: Tapered
• Termination: Solder
• Locking Feature: Flip Lock
• Features: Zero Insertion Force (ZIF)
• Contact Finish: Gold
• Operating Temperature: -55°C ~ 80°C
• Product Type: PCB
• Number Of Positions / Contacts: 8
• Mounting Angle: Right
• Mounting Style: SMD/SMT
• Contact Material: Phosphor Bronze
• Contact Plating: Gold Flash
• Actuation Type: ZIF
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: HFN408TR

Operation and Precations
1. FPC/FFC Termination procedure.
1) Lift up the actuator. Use thumb or index finger.
2) Assure that the FPC/FFC is fully inserted parallel
3) Rotate down the actuator until firmly closed.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
Connector installed on the board.
to mounting surface, with the exposed conductive
traces facing down.
It is critical that the inserted FPC/FFC is not moved
and remains fully inserted. Should the FPC/FFC be
moved, open the actuator and repeat the process,
starting with Step 1 above.
FH19C & FH19SC Series 0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
FPC conductor surface
(Bottom side)
Operation
1) Do not apply excessive force or use any type of
2)
3) Application of excessive force to the inserted
tool to operate the actuator.
FPC/FFC may cause damage to connector and
may affect the reliability of electrical connection.
If specific application
requires continuous or
repeated pull or bend of
the inserted FPC/FFC,
assure that the forces are
NOT transmitted directly
to the connector.
Precautions
9