NFK1-SC FLUKE NETWORKS, NFK1-SC Datasheet - Page 58

• Manufacturer Part Number: NFK1-SC
• Description: LAN Tester
• Manufacturer: FLUKE NETWORKS

Specifications of NFK1-SC

• Lead Free Status / RoHS Status: na

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
Tutorial: Preparing to Save Tests
The tutorial in this section guides you through setting up
the tester to save tests.
Step 1: Creating a List of Sequential Fiber IDs
This step assumes the following scenario:
•
•
•
1-1 Press
1-2
1-3
2-10
You will be testing 12 cables in two patch panels: cables
1 through 6 in panel A and cables 1 through 6 in panel
B.
Both panels are located in telecommunications closet A
on the third floor of the building.
Your fiber IDs will follow the ANSI/TIA/EIA-606-A
standard for horizontal links. See “About ANSI/TIA/EIA-
606-A Fiber IDs” on page 2- 25 for details.
Job tab.
On the AUTO SEQUENCE screen, press
Template; then select Horizontal.
On the AUTO SEQUENCE screen press
transfer the default pattern into the START ID and
STOP ID.
S
; then select AUTO SEQ TEMPLATE on the
D
A
Change
Default to
1-4 On the AUTO SEQUENCE screen press
1-5 On the AUTO SEQUENCE screen press
1-6 Press
1-7 Press
1-8 Press
Use the softkeys,
default ID to 03A-A01 in the CURRENT START ID box.
Press
Use the softkeys and
default ID to 03A-B06 in the CURRENT START ID box.
Press
sequential fiber IDs: 03A-A01 through 03A-B06. If the
tester beeps instead of showing the list, see “Solving
Problems with Fiber ID Lists” on page 2-26.
The list is saved in the mainframe (not on the memory
card or in the module).
s
s
E
e
s
Sample List. You should see a list of 12
when you are finished.
when you are finished.
to leave the sample list.
when you are finished setting up the list.
K N ML
K NML
, and
to change the
t
B
C
to change the
Edit Stop.
Edit Start.