XF2J-1424-11 Omron, XF2J-1424-11 Datasheet - Page 26

• Manufacturer Part Number: XF2J-1424-11
• Description: CONN FPC 14POS 0.5MM SMT
• Manufacturer: Omron
• Series: XF2Jr
• Type: FPC Connectorr

Specifications of XF2J-1424-11

• Connector Type: Vertical Contacts, 1 Sided
• Number Of Positions: 14
• Pitch: 0.020" (0.50mm)
• Ffc, Fcb Thickness: 0.30mm
• Height Above Board: 0.163" (4.15mm)
• Mounting Type: Surface Mount
• Cable End Type: Tapered
• Termination: Solder
• Locking Feature: Slide Lock
• Features: Zero Insertion Force (ZIF)
• Contact Finish: Tin Alloy
• Contact Finish Thickness: 79µin (2.00µm)
• Operating Temperature: -30°C ~ 85°C
• Current Rating: 0.500A
• Voltage Rating: 50V
• Housing Material: Polyamide (PA46), Nylon 4/6
• Contact Gender: SKT
• Mounting Style: Surface Mount
• Number Of Contact Rows: 1
• Number Of Contacts: 14POS
• Pitch (mm): 1mm
• Body Orientation: Straight
• Contact Resistance Max: 30mOhm
• Voltage Rating Max: 50VDC/50VAC
• Operating Temp Range: -30C to 85C
• Current Rating (max): 0.5A
• Housing Color: Natural
• Contact Material: Copper Alloy
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Product Height (mm): 4.15mm
• Product Depth (mm): 2.95mm
• Product Length (mm): 11.5mm
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: OR663TR; XF2J142411

XF
Mounting
1. Do not perform reflow or manual soldering with the FPC
2. The reflow conditions are as stated in OMRON’s specifi-
Designing
1. Gently pull out the FPC taking care not to apply force
2. When installing the FPC at a location or on equipment
3. Use the FPCs that conform to the appropriate specifica-
4. Use the same metal for the FPC plating and the connec-
5. “Whiskers” may protrude from the FPC film of some lead-
6. Make sure that the metal mask thickness is within the
26
inserted in the connector and the slider (lever) in the
locked position. Doing so may result in contact failure.
cations and guidelines. These conditions, however,
depend on the type of solder, the manufacturer, the
amount of solder, the size of the circuit board, and the
other mounting materials. Confirm the mounting condi-
tions before proceeding.
directly to the connector. Bending the FPC in the area
where it enters the connector or applying force to the FPC
itself may result in contact failure.
that will subject the FPC to repeated vibration or move-
ment, secure the FPC prior to use.
tions and size as stated by OMRON. When using a differ-
ent FPC, or an F/F, contact OMRON.
tor plating.
free FPCs. Be careful when using these units.
appropriate specifications and size as stated by OMRON.
The recommended metal mask open area is 90% of the
printed circuit board mating dimensions given in the
dimensions diagrams.
XF