XF2L-2625-1 Omron, XF2L-2625-1 Datasheet - Page 23

• Manufacturer Part Number: XF2L-2625-1
• Description: CONN FPC 26POS 0.5MM SMT
• Manufacturer: Omron
• Series: XF2Lr

Specifications of XF2L-2625-1

• Connector Type: Top Contacts
• Number Of Positions: 26
• Pitch: 0.020" (0.50mm)
• Ffc, Fcb Thickness: 0.30mm
• Height Above Board: 0.047" (1.20mm)
• Mounting Type: Surface Mount, Right Angle
• Cable End Type: Straight
• Termination: Solder
• Locking Feature: Slide Lock
• Features: Zero Insertion Force (ZIF)
• Contact Finish: Tin Alloy
• Contact Finish Thickness: 79µin (2.00µm)
• Operating Temperature: -30°C ~ 85°C
• Current Rating: 0.500A
• Voltage Rating: 50V
• Housing Material: Liquid Crystal Polymer (LCP)
• Gender: Receptacle
• Pitch Spacing: 0.5mm
• No. Of Contacts: 26
• No. Of Rows: 1
• Contact Plating: Gold
• Ffc/fpc Thickness: 0.3mm
• Contact Termination: Surface Mount Vertical
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: OR691TR; XF2L26251

XF
Operating the XF Rotary Backlock
FPC Connector Part Names
Handling Methods
Inserting the FPC
1. Insert the FPC all the way to the back of the connector.
2. Activate the slider (lever) and lock the FPC in place.
Removing the FPC
1. Move the slider (lever) upwards to disengage the locking
2. Once the lock has been disengaged, pull the FPC out.
The slider (lever) shown locked
The slider (lever) shown open
Slider (lever)
mechanism.
Circuit board
Housing
Terminal
Hold-down
FPC
Precautions during Use
Operating
1. Do not lock the slider (lever) without an FPC inserted.
2. Do not lock or unlock the slider (lever) with excessive
3. When locking the slider (lever), apply pressure with your
Locking the slider (lever) without an FPC inserted will
increase the force required to insert an FPC.
force.
Doing so may result in damage to the connector or con-
tact failure.
Do not use a slider (lever) if it becomes detached.
fingertips to both sides of the slider (lever) and then twist
the slider (lever) until it comes away from the unit. Failing
to lock the slider (lever) properly may result in contact fail-
ure.
Do not apply force horizontally to the PCB when locking
the slider (lever). Doing so may result in damage to the
connector or contact failure.
XF
23