6300-W 3M, 6300-W Datasheet - Page 17

• Manufacturer Part Number: 6300-W
• Description: CONN F/OPTIC HOT MELT SC MM
• Manufacturer: 3M

Specifications of 6300-W

• Connector Style: SC
• Simplex/duplex: Simplex
• Mode: Multimode
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Snap-In
• Ferrule Material: Zirconia, Ceramic
• Features: Hot Melt
• Color: White
• Product: SC Connectors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Connector Type: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 5400791725; 54007917250; 6300; 6300 CONN HOT MELT; 6300W; 80-6107-6502-8; 80-6111-2757-4; 80610765028; 80611127574; MF6300

8.19 Verify that the bare fiber is
8.13 Clean the fiber with a lint free
8.16 Gently insert the fiber into the
8.22 Place the connector holder into
visible in the bottom of the
connector holder.
cloth moistened with isopropyl
alcohol.
connector.
the cooling stand. The cooling
time is about 3 minutes.
8.14 Cut the aramid yarn to
8.17 Push the cable until it stops
8.20 Crimp the larger part of the
(8 mm) long.
against the connector. The
aramid yarn should flare out
over the backbone.
crimp ring with the .190 cavity
of the crimp tool.
17
5
Ú
16
"
8.15 Remove the connector holder
CAUTION: VERY HOT.
8.18 Slide the crimp ring over the
8.21 Crimp the smaller part of the
from the oven.
aramid yarn until it is seated
against the connector.
crimp ring using the .137 cavity.
(Use the .120 cavity for the
optional 2.4 mm crimp ring)