35852 Menda, 35852 Datasheet - Page 2

• Manufacturer Part Number: 35852
• Description: Tools, Vacuum Cleaner
• Manufacturer: Menda

Specifications of 35852

• Power Rating: 600W
• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Size, Pore: 0.12 Micron
• Voltage, Supply: 110 VAC
• Weight: 6.5 Pounds
• Esd Protected Utensils Include: Hose, Gooseneck, Crevice Tool, Brush
• Lead Free Status / Rohs Status: RoHS Exempt Product

TB-4003 Page 2 of 2
Figure 3: Lifting out the cartridge.
Grasp the handle of the vacuum, tilt it forward at a 45
degree angle, and slide the filter cartridge out.
Figure 4: Sliding the cartridge out.
Dispose of the filter in an appropriate manner. Reinstall a
new filter cartridge with the pleated paper end toward the
motor. The label on the filter should be facing up.
Figure 5: Reinstalling the filter cartridge.
Replace the filter door, carefully aligning it, first the top,
then the bottom. Press firmly on the side tabs, pushing
them past the second notch.
of the inlet door until they are free from the latching
mechanism on the body of the vacuum. Then pull
the door toward you, being careful not to damage the
ground wire (door may hang by ground wire while the
new filter is being inserted).
Phone: [phone] • Fax [phone] • Web Site: MendaPump.com
3651 Walnut Avenue, Chino, CA 91710
Transporting Instructions
Unplug the detachable power cord from the outlet and
vacuum. Remove any attachments and the flex-hose
and return the vacuum and attachment to their shipping
container, unless you have the optional carrying case.
Insert the orange plug into the end of the door to prevent
spillage.
Specifications
Noise Level: 84 decibels
Hepa Vac
Suction: Approx. 50"/H20
Service Vac
Suction: Approx. 40"/H20
The Hepa Vac and Service Vac motors are 600 Watts. It
has approximately one quart capacity.
The hose jacket is made out of conductive material
called santoprene and the hose ends are ESD safe
polypropylene material.
RoHS Compliance Statement
None of the following materials are intentionally added in
manufacturing this product: lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE) as outlined in the Directive 2002/95/EC
Article 4.1. See Desco Industries Inc. letter on-line at
com.
Limited Warranty
Menda expressly warrants that for a period of one (1) year
from the date of purchase, Menda HEPA Vacs and Service
Vacs will be free of defects in material (parts) and workmanship
(labor). Within the warranty period, the product will be tested,
repaired, or replaced at Menda’s option, free of charge. Call our
Customer Service Department at 909-627-2453 for a Return
Material Authorization (RMA) and proper shipping instructions
and address. Include a copy of your original packing slip, invoice,
or other proof of purchase date. Any unit under warranty should
be shipped prepaid to the Menda factory. Warranty repairs will
take approximately two weeks.
If your unit is out of warranty, call Customer Service at
909-627-2453 for a Return Material Authorization (RMA) and
proper shipping instructions and address. Menda will quote repair
charges necessary to bring your unit up to factory standards.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU
OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND
IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY
DISCLAIMED. The express warranty will not apply to defects or
damage due to accidents, neglect, misuse, alterations, operator
error, or failure to properly maintain, clean or repair products.
Limit of Liability
In no event will Menda or any seller be responsible or liable for
any injury, loss or damage, direct or consequential, arising out
of the use of or the inability to use the product. Before using,
users shall determine the suitability of the product for their
intended use, and users assume all risk and liability whatsoever
in connection therewith.
© 2010 DESCO INDUSTRIES INC.
MendaPump.
Employee Owned