8119 3M, 8119 Datasheet - Page 13

• Manufacturer Part Number: 8119
• Description: COUPLING F/OPTIC THREAD W/PAN SM
• Manufacturer: 3M
• Type: Couplerr

Specifications of 8119

• Convert From (adapter End): ST Simplex Receptacle
• Convert To (adapter End): ST Simplex Receptacle
• Mode: Singlemode
• Mounting Type: Panel Mount
• Angle: Straight
• Connector Type: ST
• Primary Type: Fiber Optic
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 5400768747; 54007687474; 80-6106-2599-0; 80610625990; 8119 COUPLING ST SM; MF8119

6.13 Stripping template.
6.16 Remove the connector holder
CAUTION: VERY HOT.
6.19 Slide the crimp ring over the
6.22 Crimp the smaller part of the
from the oven.
aramid yarn until it is seated
against the connector.
crimp ring using the .137
cavity. (Use the .120 cavity
for the optional 2.4 mm crimp
ring.)
(8 mm)
5/16"
(14-16 mm)
9/16"
(30 mm)
13/16"
9/16" Min.
(14 mm)
6.17 Gently insert the fiber into the
6.14 Clean the fiber with a lint free
6.20 Verify that the bare fiber is
6.23 Place the connector holder into
cloth moistened with isopropyl
alcohol.
connector.
visible in the bottom of the
connector holder.
the cooling stand. The cooling
time is about 3 minutes.
13
6.18 Push the cable until it stops
6.15 Cut the aramid yarn to
6.21 Crimp the larger part of the
(8 mm) long.
against the connector. The
aramid yarn should flare out
over the backbone.
crimp ring with the .190 cavity
of the crimp tool.
5
Ú
16
"