07200 Desco, 07200 Datasheet
07200
Manufacturer Part Number
07200
Description
CHAIR COVER, STATSHIELD,DISSIPATIVE
Manufacturer
Desco
Datasheet
1.07200.pdf
(1 pages)
Specifications of 07200
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
© 2011 DESCO INDUSTRIES INC.
Employee Owned
Product marked with ESD protective symbol to identify used for ESD control
“Fabric upholstered chairs accomplish this by using conductive
fibers woven into the fabric. The fabric is then connected through the
components of the chair, through the cylinder, base and casters (or drag
chain) to the floor.” [ESD Handbook TR20.20 Seating section 5.3.5.2
Types and Selection]
Chair not included
Statshield
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE:
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
If not otherwise noted, tolerance ±10%
Specifications and procedures subject to change without notice
Description:
Desco’s
protective chair when grounded. The drag chain must connect the chair back and seat covers and
make reliable contact with ESD flooring to remove electrostatic charges to ground. Using the same
fabric as ESD smocks, the cover’s conductive fibers attenuate electrostatic fields shielding ESD
sensitive items. It’s one size fits standard sized chairs and covers both seat and chair backs. In
addition to shielding, the Statshield Chair Cover is low charging antistatic, and dissipative.
Specifications:
Grounding resistance:
Chain Length:
Fabric Weight:
Fabric Content:
Fabric Color:
Carbon Mono-filament:
Surface Resistance of Fabric:
Static Decay Rate:
Size
Laundering Instructions:
If need be, this cover can be laundered. Use cool or warm water. Maximum temperature 120 °F. Do
not use bleach, tumble dry on cool.
Installation Instructions:
Attach top part of cover to chair back and bottom part of cover (with grounding chain attached) to
chair seat. Make sure cover is fitted, centered, and secured to chair. Secure the ground chain to
center post underneath chair with hook and loop and make sure ground chain makes contact with
grounded ESD floor. Suggest a chain minimum length of 6 inches making contact along the floor.
Seat:
Back:
07200
®
Statshield
Dissipative Chair Cover
FAX (781) 575-0172
®
Dissipative Chair Cover can convert a regular chair into an ESD
18” x 20”, maximum diameter 19” nominal
15 1/2” x 18 1/2”, maximum diameter 17” nominal
1 megohm hermetically sealed resistor
24” long chain with current limiting resistor in series
5 oz per square yard
80% polyester, 19% cotton, and 1% BASF
carbon suffused mono-filament nylon
Royal Blue
Conductive at 10E4 ohms, non-flaking and
non-sloughing
10E6 - 10E8 ohms tested per ESD TR53 Seating test
based on ANSl/ESD STM12.1, Seating - Resistive
Measurement
5000 volts to 500 volts in less than 0.01
seconds, per FTMS-101C
Desco.com
DRAWING NUMBER
07200
Made in America
DATE
2011
May