13843 Desco, 13843 Datasheet - Page 3

• Manufacturer Part Number: 13843
• Description: DESICCANT PAK, 1 UNIT,BOX OF 450
• Manufacturer: Desco

SECTION VI - REACTIVITY DATA
REACTIVITY - Is stable under normal temperatures and pressures in sealed containers.
Hazardous polymerization will not occur.
SECTION VII - SPILL OR LEAK PROCEDURES
Notify safety personnel of spills or leaks. Clean-up personnel need protection against inhalation
of dusts or fumes. Eye protection is required. Vacuuming and/or wet methods of cleanup are
preferred. Place in appropriate containers for disposal, keeping airborne particulates at a
minimum. Clay is slippery when wet.
DISPOSAL - Consult application local, state, and federal regulations to select the method of
disposal.
SECTION VIII - SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION - Provide a NIOSH/MSHA jointly approved respirator in the
absence of proper environmental control. Contact your safety equipment supplier for proper
mask type.
VENTILATION - Provide general and/or local exhaust ventilation to keep exposure below the
TLV. Ventilation used must be designed to prevent spots of dust accumulation or recycling of
dusts.
PROTECTIVE CLOTHING - Wear protective clothing, including long sleeves and gloves, to
prevent repeated or prolonged skin contact.
EYE PROTECTION - Chemical splash goggles designed in compliance with OSHA regulations
are recommended. Consult your safety equipment supplier.
SECTION IX - STORAGE PRECAUTIONS
Store in a dry, well-ventilated place, below 115 degrees F., away from a heat source. Keep in
tightly closed container. Protect container from physical damage. Always reseal container and
protective moisture barrier liner after use.
SECTION X
HMIS (Hazardous Materials Identification System) for this product is as follows:
Health Hazard
Flammability
Reactivity
Personal Protection
0
0
0
HMIS assigns choice of personal protective
equipment to the customer, as the raw
material supplier is unfamiliar with the
condition of use.
The information contained herein is based upon data considered true and accurate. However,
Desco Industries makes no warranties expressed or implied, as to the accuracy or adequacy
of the information contained herein or the results to be obtained from the use thereof. This
information is offered solely for the user’s consideration, investigation and verification. Since the
use and conditions of use of this information and the material described herein are not within
the control of Desco Industries, Desco Industries assumes no responsibility for injury to the user
or third persons. The material described herein is sold only pursuant to Desco Industries Terms
and Conditions of Sales, including those limiting warranties and remedies contained therein. It is
also the responsibility of the user to determine whether any use of the data and information is in
accordance with applicable federal, state or local laws and regulations.
RoHS Compliance Statement
None of the following materials are
intentionally added in manufacturing this
product: lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB)
or polybrominated diphenyl ethers (PBDE) as
outlined in the Directive 2002/95/EC Article
4.1. See Desco Industries Inc. letter on-line at
Desco.com.