CCM01-2252LFT C&K Components, CCM01-2252LFT Datasheet - Page 17

• Manufacturer Part Number: CCM01-2252LFT
• Description: CONN SMART CARD DETECT 16PIN SMD
• Manufacturer: C&K Components
• Series: CCM01 MK IIr

Specifications of CCM01-2252LFT

• Card Type: Smart Card
• Number Of Positions: 18 (16 + 2)
• Connector Type: Connector
• Insertion, Removal Method: Push In, Pull Out
• Mounting Type: Surface Mount, Right Angle
• Features: Board Guide, Switch
• Height Above Board: 0.248" (6.30mm)
• Mounting Feature: Normal, Standard - Top
• Contact Finish: Gold
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Contact Finish Thickness: -
• Ejector Side: -
• Other names: *CCM01-2252LFT

PRODUCT SPECIFICATION
8 - Process environment
Soldering processes :
Solder heat resistance
Static load (transverse)
(CCM / PCB)
Terminal robustness
Contact retention in insert
Metallic peg retention in housing
Reinforced version
Solderability (wetting balance)
Dust sealed test (only for switch)
Resistance to fluids
9 – Operating environment
Operating life
Vibration
Mechanical shock
Rapid change of temperature
Climatic sequence
Dry heat storage
Lead free reflow soldering
process (SMT terminals)
Lead Free single or double
wave soldering process
(through Hole Terminals)
CCM01-MKII V2-LFT
Ref. / PS-CCM01-MKII-2
3 cycles at max profile according to IEC
61760-1:2006
According to IEC 60068-2-58
10 N / 1 mn / 4 directions (standard version)
40 N / 1 mn / 4 directions (reinforced version)
According to IEC 512-5 test 8a/8b
1 bend / 45° / forward & back
According to IEC 60068-2-21 test Ub method 1
2 N / 10sec./ displacement < 0.3 mm
According to IEC 512-8 test 15a
245°C
According to IEC 60068-2-69
Dust test / IP5x
According to IEC 60529:1989/A1:1999
The product is not compatible with washing
process.
Recommendation: 4 metal pegs.
Other configurations are possible, according to
customer integration.
10-500 Hz / 50 m/s² / 3 axis / 2 hours per axis
No discontinuity > 1 µs
According to IEC 60068-2-6.
500 m/s² / ½ sinusoidal / 11 ms
3 shocks in the 2 directions of the 3 axis
No discontinuity > 1 µs
According to IEC 60068-2-27.
100 cycles / - 40°C / + 85°C
According to IEC60068-2-14, test Nb
Dry heat : 85°C / 16 hours
Damp heat : 1 cycle 24 hours 55°C & 93% HR
Cold : – 40°C / 2 hours
Damp heat : 1 cycle 24 hours 55°C & 93% HR
According to IEC 60068-2-61, test Z/ABDM
85°C / 250 hours
According to IEC 60068-2-2 , test Bb.
Recommendation for solder paste thickness :
30 N (lateral & axial directions)
100 000 cycles
According to IEC 61760-1:2006
According to IEC 61760-1:2006
at 10 N force for standard version
at 40 N force for reinforced version
September 2008
Issue 1-rev.G
Page 6 / 8
0.20 mm