CPM1A-10CDR-A Omron, CPM1A-10CDR-A Datasheet - Page 9

• Manufacturer Part Number: CPM1A-10CDR-A
• Description: PLC, 10 I/O, AC, RELAY OUTPUT
• Manufacturer: Omron

Specifications of CPM1A-10CDR-A

• Supply Voltage: 240VAC
• No. Of Digital Outputs: 4
• Svhc: No SVHC (15-Dec-2010)
• Approval Bodies: CE, CSA, UL
• External Depth: 85mm
• External Length / Height: 90mm
• External Width: 66mm
• Input Current: 5mA

J ANALOG I/O MODULE
Note: 1. The voltage output and current output can be used at the same time, but the total output current cannot exceed 21 mA.
J TEMPERATURE SENSOR MODULES
By connecting a Temperature Sensor Module
(CPM1A-TS001/TS002/TS101/TS101A/TS102) to the CPM1A,
inputs can be received from thermocouples or temperature-
resistance thermometers. Inputs converted to binary data (4-digit
hexadecimal) and stored in the IR area.
Specifications
Note: 1. The same input type must be used for all inputs.
CPM1A
Item
Model
I/O type
Analog inputs
Analog output
(See Note 1.)
Conversion time (See Note 2.)
Isolation method
Item
Model
Number of inputs
Input types
(See Note 1)
Input resolution
Input accuracy
Number of outputs
Output types
Output resolution
Output accuracy
Conversion cycle
Converted
temperature data
Isolation method
2. The conversion time is the total time for 2 analog inputs and 1 analog output.
2. Accuracy for K thermocouples at temperatures less than –100°C: ±4°C ± 1 digit max.
Number of inputs
Input signal range
Maximum rated input
External input impedance
Resolution
Overall precision
Converted A/D data
Number of outputs
Output signal range
External output max. current
External output allowed load
resistance
Resolution
Overall precision
Data setting
Specification
CPM1A-TS001/TS002
TS001: 2; TS002: 4
Thermocouple types K or J, selectable Platinum resistance thermometer types Pt100 and JPt1100, selectable
0.1°C in 2’s complement format
±0.5% or ±2% of the stored value
whichever is larger ±1 digit max.
(See Note 2)
None
—
—
—
250 ms for all points
Binary data (4-digit hexadecimal)
Photocoupler isolation between I/O terminals and the PLC
Specification
CPM1A–MAD01
Voltage
2
0 to 10 V or 1 to 5 V
±15 V
1 MΩ min.
1/256
1.0% of full scale
8-bit binary
1
0 to 10 V or –10 to 10 V
5 mA
—
1/256 (1/512 when the output signal range is –10 to 10 V.)
1.0% of full scale
8-bit binary with sign bit
10 ms/Unit max.
Photocoupler isolation between I/O terminals and PC
(There is no isolation between the analog I/O signals.)
CPM1A-TS101/TS102
TS101: 2; TS102: 4
0.1°C in 2’s complement format
±0.5% or ±1% of the stored value
whichever is larger ±1 digit max.
(See Note 2)
None
—
—
—
Current
4 to 20 mA
±30 mA
250 Ω rated
4 to 20 mA
—
350 Ω
CPM1A-TS101-DA
2
1.0% max. full scale
1
Voltage or current output
1/256 (0 to 10 V)
1/512 (–10 to +10 V)
1/256 (4 to 20 mA)
1.0% max. full scale
60 ms max. for all points
Binary data (8-digit hexadecimal)
CPM1A
9