C200H-WCE011 Omron, C200H-WCE011 Datasheet - Page 5

• Manufacturer Part Number: C200H-WCE011
• Description: MASTER MODULE
• Manufacturer: Omron

Specifications of C200H-WCE011

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

J MANUALS
Specifications
J GENERAL SPECIFICATIONS
Note: 1. Use the external power supply as the power supply for input devices only. (It cannot be used to drive output devices.)
Product
Expansion Memory Unit
EEPROM (256 kbits)
Product
Operation manual
Programming manual
Item
Supply voltage
Operating voltage
range
Power consumption
Inrush current
External power
supply (AC power
supply (AC power
supplies only)
Insulation resistance
Dielectric strength
Noise immunity
Vibration resistance
Shock resistance
Ambient temperature
Humidity
Atmosphere
Terminal screw size
Power interrupt time
CPU weight
Expansion weight
A--50
p
pp y
2. If the external power supply current exceeds the rated current, or there is a short-circuit, the external power supply voltage will
3. If there are 3 CPM1A-MAD11 modules mounted to a CPM2A-60CDR-A, the current for the external power supply must not
g
g
drop and PLC operation will stop.
exceed 200 mA.
g
p
Micro Programmable Controller
p
g
AC power
DC power
AC power
DC power
AC power
DC power
AC power
DC power
Supply voltage
Output capacity
AC power
DC power
Description
Uploads and downloads program and setup memory areas to and
from the controller.
Used with the Expansion Memory Unit
Description
CPM2A operation manual
CPM1/CPM1A/CPM2A/CPM2C/SRM1(-V2) Programming Manual
CPUs with
20 I/O points
100 to 240 VAC, 50/60 Hz
24 VDC
85 to 264 VAC
20.4 to 26.4 VDC
60 VA max.
20 W max. (See separate table following this one for details)
60 A max.
20 A max.
24 VDC
300 mA (See Notes 1, 2, 3.)
20 MΩ min. (at 500 VDC) between the external AC terminals and protective earth terminals.
2,300 VAC 50/60 Hz for 1 min between the external AC and protective earth terminals, leak-
age current: 10 mA max.
Conforms to IEC61000-4-4, 2 kV (power lines)
10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s
tions for 80 minutes each.
(Time coefficient; 8 minutes × coefficient factor 10 = total time 80 minutes)
147 m/s
Operating: 0° to 55°C
Storage: --20° to 75°C
10% to 90% (with no condensation)
Must be free from corrosive gas
M3
AC power supply: 10 ms min.
DC power supply: 2 ms min.
650 g max.
550 g max.
Units with 20 I/O points:
Units with 8 output points:
Units with 8 input points:
MAD01 Analog I/O Unit:
MAD11 Analog I/O Unit:
Temperature Sensor Units:
CompoBus/S I/O Link Unit:
DeviceNet I/O Link Unit:
Profibus-DP Slave Unit:
2
three times each in X, Y, and Z directions.
CPM2A
CPUs with
30 I/O points
700 g max.
600 g max.
300 g max.
250 g max.
200 g max.
150 g max.
250 g max.
250 g max.
200 g max.
200 g max.
125 g
CPUs with
40 I/O points
800 g max.
700 g max.
Part number
CPM1-EMU01-V1
EEPROM-CPM1-EMU01
Part number
W352
W353
2
in X, Y, and Z direc-
CPUs with
60 I/O points
1,000 g max.
900 g max.