C200H-WSLK23 Omron, C200H-WSLK23 Datasheet - Page 19

• Manufacturer Part Number: C200H-WSLK23
• Description: MASTER MODULE
• Manufacturer: Omron

Specifications of C200H-WSLK23

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Functions
J CONFIGURATION
The CPM2A PLCs incorporate a variety of features, including
synchronized pulse control, interrupt inputs, pulse outputs,
analog settings, and a clock function. Use the CPM2A CPU as a
stand-alone controller for a broad range of machine control
applications.
J TIME-PROPORTIONAL CONTROL
The CPM2A performs simple-to-program, time-proportional
control using up to three Analog I/O modules (maximum 6 analog
inputs and 3 analog outputs) and the PID and PWM expansion
instructions. These instructions set the parameters for PID
control and a pulse output with variable duty ratio. For increased
reliability, an open-circuit detection function can be used with the
1 to 5 VDC and 4 to 20 mA analog input settings.
J DISTRIBUTED I/O CONTROL
Omron’s CompoBus/S Network provides distributed CPU control
based on a “PLC + compact PLC” configuration which provides
improvements over distributed control based on “PLC + remote
I/O” configurations. The distributed CPU control makes
equipment module, so designs can be standardized, special
needs can be addressed and modules can be replaced easily in
the event of breakdown without affecting the main CPU.
J BUILT-IN MOTOR CONTROL CAPABILITY
Synchronized Pulse Control (transistor output models only)
Synchronized output pulse control provides an easy way to
coordinate the operation of a peripheral piece of equipment with
the main equipment. The output pulse frequency can be
controlled as a multiple of the input pulse frequency, allowing the
speed of a peripheral piece of equipment (such as a supply
conveyor) to be synchronized with the speed of the main piece of
equipment.
A--64
Micro Programmable Controller
Peripheral Port
Use this port for programming devices (compa-
tible with other OMRON PLCs) as well as Host
Link and no-protocol communications.
CPM2A
The CPU contains 20, 30, 40, or 60 I/O points and Expansion I/O
blocks can be added to provide a total I/O capacity of up to 120 I/O
points. Analog I/O modules, Temperature Sensor modules, and
CompoBus/S I/O Link modules can also be connected.
The CPM2A easily communicates with personal computers, other
OMRON PLCs, and OMRON Programmable Terminals. These
communications capabilities allow the user to design a low-cost
distributed production system.
For temperature monitoring applications, CPM2A accepts up to 6
inputs (two per module) from Temperature Sensor Input modules.
The PID instruction can manipulate the input from either
thermocouple or platinum resistance thermometer sensors.
Master
CPU control
Pulses are output as a fixed multiple of the input frequency.
PLC
Distributed
Encoder
RS-232C Port
This port can be used for a Host
Link, no-protocol, 1:1 data link, or
1:1 NT Link communications.
CompoBus/S Master Module
CPM2A
CPM2A
(Slave)
CompoBus/S I/O
CompoBus/S
Link Module
3G3MV Drive
Motor