FC4A-ENET IDEC, FC4A-ENET Datasheet - Page 5

• Manufacturer Part Number: FC4A-ENET
• Description: Web Server/Ethernet Module Included RS232 Cable And QuickStart Guide
• Manufacturer: IDEC

Specifications of FC4A-ENET

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The MicroSmart has four built-in high speed counters. One high
speed counter (all-in-one type) or two high speed counters (slim
type) can be used as either two-phase or single-phase high speed
counters at a maximum of 20kHz. The other three (all-in-one type)
or two (slim type) have a maximum frequency of 5kHz. High speed
counters are used for simple positioning and motor control.
Ready for connecting 0 to 10V DC from an external device
directly to the built-in analog voltage input connector
(Slim type CPU modules only).
The analog potentiometer built into the CPU module enables
settings to be adjusted without special tools.
Two built-in 24-I/O type
One built-in 10/16-I/O types
Type
Maximum
Input
Frequency
Counting Range
Operation Mode
Gate Input
Current
Value
Reset
External
All-in-One Type
Device
Built-in Analog Voltage Input
Analog Potentiometer
High-speed Counters
Single-phase
HSC1 and 4: 20 kHz
HSC2 and 3: 5 kHz
16 bits (0 to 65,535)
Adding counter
Enable/disable counting
Current value is reset to
zero when the current
value reaches the pre-
set value.
Standard on all models
Two-phase
HSC1: 20 kHz
HSC4: 20 kHz (SlimType CPU)
16 bits (0 to 65,535)
Rotary encoder
(phases A, B, Z)
Enable/disable counting
Current value is reset to
a given value when
overflow or underflow
has occurred.
Slim Type
Slim Type
After installation the analog potentiometer in the CPU module
allows you to easily change values such as timer preset values
or the volume of water.
The rotary encoder can connect directly to the paper feeder.
The high-speed counter receives and reads output pulses from
the rotary encoder.
Speed Control
5