CPC123555SC-F EBM-Papst Industries Inc, CPC123555SC-F Datasheet - Page 10

• Manufacturer Part Number: CPC123555SC-F
• Description: DCP CONTROLLER 12V, 35-55C OC AL
• Manufacturer: EBM-Papst Industries Inc

Specifications of CPC123555SC-F

• Thermocouple Type: 2m Long NTC Thermistor
• Operating Temperature Max: 75°C
• Operating Temperature Min: -20°C
• Svhc: No SVHC (15-Dec-2010)
• External Depth: 45mm
• External Length / Height: 8mm
• External: RoHS Compliant

DCP Fan Controller
Connection to alarm output
Remote supply
Pull up
Resistor
Alarm
Alarm signal
Ground
Ground
The alarm output cable should only be connected to the upper of the two connectors shown above. The other is reserved for future
expansion.
As shown, the blue wire should be connected to the ground reference of the monitoring device and the white wire to the alarm input on
the monitoring device. Note that the alarm output supplies no voltage, it switches to ground instead. Therefore you should connect a
pull up resistor from the alarm signal wire to a supply that is local to the monitoring device.
4. Configuration
The DCP fan controller is supplied with one of two pre-set temperature profiles and a fixed alarm point. These are not configurable,
please contact ebm-papst UK Ltd if you require assistance with selecting a different EC fan controller with a different profile.
10