PAXCDC50 Red Lion Controls, PAXCDC50 Datasheet - Page 23
PAXCDC50
Manufacturer Part Number
PAXCDC50
Description
Profibus-DP Communications Network Interface Card
Manufacturer
Red Lion Controls
Datasheet
1.PAXCDL10.pdf
(32 pages)
Specifications of PAXCDC50
Accessory Type
Profibus-DP Communications Network Interface Card
For Use With
Red Lion PAX Digital Input Panel Meters
Lead Free Status / RoHS Status
na
Assignment (
assigned counter is reset by a Counter Auto reset generated by another setpoint.
activates. (Example: SP1 deactivates when SP2 activates and SP4 when SP1
activates.) The last setpoint will wrap around to the first.
PAXC & I: SETPOINT RESET WITH DISPLAY RESET *
PAXC & I: SETPOINT RESET WHEN SPn+1 ACTIVATES *
Select
Select
, so the setpoint output will deactivate (reset) when the Setpoint
, so the setpoint output will deactivate (reset) when SPn +1
) counter display resets. The only exception is if the
HIGH ACTING WITH NO DELAY
LOW ACTING WITH NO DELAY
HIGH ACTING WITH TIMEOUT
PAXR & I: SETPOINT (ALARM) FIGURES FOR RATE
(For Reverse Action, The Alarm state is opposite.)
23
activates and then times out (deactivates). This function may only be used if the
SPn+1 is programmed for Setpoint Action of
when SP2 is activated and then times out.) The last setpoint will wrap around
to the first.
*
PAXC & I: SETPOINT RESET WHEN SPn+1 DEACTIVATES *
Factory Setting can be used without affecting basic start-up.
Select
, so the setpoint output will deactivate (reset) when SPn +1
LOW ACTING WITH TIMEOUT
LOW ACTING WITH DELAY
HIGH ACTING WITH DELAY
. (Example SP1 deactivates