NT30-KBA01 Omron, NT30-KBA01 Datasheet - Page 290

• Manufacturer Part Number: NT30-KBA01
• Description: CHEMICAL RESISTANT COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA01

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Making the Cable to Connect to the PC
Soldering
(1) Slide heat-shrink tube over each wire.
(2) Pre-solder each wire and connector cable.
(3) Solder each wire to the connector terminal.
(4) Push the heat-shrink tube over the soldered joint and heat the tube to shrink it in place.
Connector Cover Assembly
Assemble the connector covers as shown in the diagram below.
280
(3) Cut back the shield with scissors.
(4) Use wire strippers to strip the insulation from each wire.
(5) Wrap vinyl tape over the cut off end of the shield.
(1)
(2)
(3)
(4)
(5)
End connected to FG
Heat-shrink tube
(F, 1.5mm dia, l = 10mm)
5(0.19)
[Units: mm (in.)]
40 (1.57) (RS-232C)
25 (1.00) (RS-422A)
Aluminum foil tape
Vinyl tape
Soldering iron
Heat-shrink tube
End not connected to FG
Appendix E