NT20S-CFL01 Omron, NT20S-CFL01 Datasheet - Page 112

• Manufacturer Part Number: NT20S-CFL01
• Description: NT20S BLACKLIGHT UNIT
• Manufacturer: Omron

Specifications of NT20S-CFL01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

96
Various System Settings
Set the support tool mode by the menu operation from the system menu shown
below.
To quit after setting the selected item, press the WRT & EXIT touch switch. To quit
without setting, press the Quit touch switch. The NT20S will enter the RUN mode.
S When “NT20M” is set, the NT20M compatible mode is established and the termi-
S When “NT20S” is set, the terminal can be used as an NT20S.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting
I/O Check
Init. Memory
Memory Switch
Comm. Type
Key Sound
Buzzer Sound
Bk light Off
Tool Mode
nal can be used as an NT20M.
MEMORY SW MENU
Host Link
OFF
OFF
None
NT20M
DIP-SW Status
(1/2)
WRT&
Page
EXIT
Quit
Select “Maintenance Mode”.
Select “Memory Switch”.
Each time the “Tool Mode” touch
switch is pressed, the setting
option
“NT20S” and “NT20M”.
(The figure to the left shows the
NT20S-ST121-EV3 screen.)
alternates
Section 3-8
between