DPM 2AS-BL LASCAR, DPM 2AS-BL Datasheet - Page 3

• Manufacturer Part Number: DPM 2AS-BL
• Description: VOLTMETER, LCD, 3.5DIGIT, 35MM
• Manufacturer: LASCAR

Specifications of DPM 2AS-BL

• Supply Voltage Range: 3V To 7.5V / 6V To 15V
• No. Of Digits / Alpha: 3.1/2
• Display Size: 32.5mm X 14.5mm
• Panel Cutout Height: 15mm
• Panel Cutout Width: 33mm
• Operating Temperature Range: 0°C To +50°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIN FUNCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. XDP
Note:
A negative supply is generated internally and mirrors the positive supply. For example: if V+ is +5V, then
the internally generated V- is -5V. When measuring with the input referenced to the same supply rail as
that of the panel meter, then the limitations on the input range are (V- + 1.5V) to (V+ - 1.5V).
Solder Links:
LCOM
LXDP
CIRCUIT DIAGRAM
V+
GND
V-
BL-
INHI
INLO Negative measuring input.
DP1
DP2
DP3
Normally Open. Connects INLO to COM.
Normally Closed. Cut this link to disable the internal decimal point drive circuit and thereby
reduce the meter's current consumption.
Positive power supply to the meter.
0V power supply to the meter (3.0 to 7.5V meter power supply applications only).
Negative power supply to the meter (6.0 to 15.0V meter power supply applications only).
Connect to the meter's negative supply voltage to switch on the LED backlighting.
For meter supply voltages above 5V, add a series resistor Rs.
See Applications for suitable circuit diagrams.
Positive measuring input.
Connect to XDP to display DP1 (199.9).
Connect to XDP to display DP2 (19.99).
Connect to XDP to display DP3 (1.999).
Connect to pin 7, 8 or 9 to display required decimal point.
www.lascarelectronics.com
3½ Digit Backlit LCD Voltmeter Module
Page 3 of 4