0727235-001 VEEDER ROOT, 0727235-001 Datasheet - Page 29

• Manufacturer Part Number: 0727235-001
• Description: Electromechanical Totalizing Counter
• Manufacturer: VEEDER ROOT

Specifications of 0727235-001

• No. Of Digits / Alpha: 5
• Digit Height: 4.7mm
• Mounting Type: Base
• Lead Free Status / RoHS Status: na

OPERATION
Timing is referenced to the service line frequency. The line frequency is
counted and internal divider networks determine one of six available
time ranges.
Two count modes are available and determined by external wiring.
Mode 1: Line voltage is applied to the count input. The count is
registered when the line voltage is removed from the count input
(trailing edge). Mode 2: Contact closure across the internal count
circuit registers a count (leading edge).
All units have remote reset capability through external wiring.
The 02 option features a manual reset push-button on the front of the
unit in addition to the remote reset capability.
The DX100 Totalizer has an internal, replaceable battery. The charge
on the battery is maintained at a constant level by a trickle charge
circuit. A fully charged battery will maintain memory and readout for a
minimum of 650 hours with power disconnected. It is recommended
that the battery be replaced every two years. Initial slow response of
the LCD readout indicates a low battery charge. To charge battery to
full capability, apply line voltage to the unit for 48 hours.
The DX100 is a solid state time/count totalizer. Its features include:
NOTE: The cable from the totalizer to the remote reset switch must
be a twisted pair with a maximum length of 5 feet.
Housed in 1/16 DIN molded NORYL
0.5 inch high, 4 1/2 digit liquid crystal display
Annunciators on front panel indicate time/count operating mode and
time range
6 time ranges from 1999.9 sec. to 19999 hrs. and count range of
19999 counts
Surface mounted using standard square base relay socket
(accessories available for fixed or plug-in panel mounting)
VEEDER-ROOT
EAGLE SIGNAL
Electronic Totalizing Counters
Electronic Totalizing Counters
®
case
brand
brand
DX100 Time/Count Totalizer
SPECIFICATIONS
Time/Count Ranges:
Repeatability: Timing is based on service line frequency
Count Accuracy: 100%
Count Speed: 2500 per min. with voltage application:
Reset Time: 10 ms
Cycle Progress: 4 1/2 digit liquid crystal display, .5" high (12.7 mm)
Voltage/Frequency: 120 VAC, 60 Hz (Can be field modified for
Burden: 120 VAC, 1.2 Watts
Current Required to Energize Count Line: 16.4 microamperes
Power Interruption: Line voltage interruptions will not reset timer or
Temperature Range: 32° to 140°F (0° to 60°C)
Transient Voltage Immunity: Performance unaffected by 50
Vibration: Unaffected by 2.5
Approvals: UL Recognition E96337
5000 per min. with switch closure: 4 ms "ON" 8 ms "OFF"
50 Hz operation)
120 VDC, 1.2 Watts (Counter only)
counter. Battery life is a minimum of 2 years (field-replaceable).
microseconds, 600 V peak transients superimposed on line input.
directions of three perpendicular mounting axes imposed from 20 to
900 Hz
VEEDER-ROOT • EAGLE SIGNAL • DYNAPAR
Totalizes count or
elapsed time…
convienient surface
mount in relay socket
or panel mount
Sym.
00
01
02
03
04
05
06
07
8 ms "ON" 16 ms "OFF"
Factory Programmed
G
sinusoidal vibration magnitudes in both
1999.9 Sec.
1999.9 Min.
19999 Sec.
19999 Min.
1999.9 Hr.
19999 Ct.
19999 Hr.
Range
Time
®
RECOGNIZED
1.13
E
L
E
C
T
R
O
N
C
I
1
O
N
G
T
T
A
L
Z
I
I