03603-122-09220 IEE (INDUSTRIAL ELECTRONIC ENGINEERS), 03603-122-09220 Datasheet - Page 7

• Manufacturer Part Number: 03603-122-09220
• Description: Vacuum Fluorescent Display Panel
• Manufacturer: IEE (INDUSTRIAL ELECTRONIC ENGINEERS)

Specifications of 03603-122-09220

• Width: 7.75"
• Signal Input Type: DC Voltage
• Supply Voltage: 5V
• Character Size: 5mm
• Height: 2.58"
• Depth: 1"
• Mounting Type: Surface
• Supply Current: 675mA
• Display Font Color: Green
• Operating Temperature Max: 70°C
• Operating Temperature Min: -20°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Vacuum Fluorescent Display Module Specifications
Serial Interface Requirements:
Century Series
Input levels:
Baud rate selectable:
Data word:
Parity:
Power Input Requirements:
Power:
Supply voltage:
Supply current:
Supply rise time:
*Rapid power sequencing is not recommended. The power/data cable
Note: Detailed specifications on IEE’s VF and LCD modules can
Data Interface:
Parallel data input:
Serial data input*:
I/O hardware lines:
I/O connector:
*Optional serial data converter module available on “No-Frills” Series
Parallel Interface Requirements:
Century Series
Input levels:
Output levels:
Pull-ups:
“No-Frills” Series
Input levels:
Output levels:
Pull-ups:
Display Characteristics:
Character format:
Character height:
Display color:
Brightness level:
Viewing angle:
Tube life:
should not be connected/disconnected while power is applied.
be downloaded from our web site www.ieeinc.com
high +3 to +15 volts (space/logic 0)
low -3 to -15 volts (mark/logic 1)
1200, 9600, or 19200 (maximum
10 bits (8 data bits with start bit and
none
ON/OFF sequence*
5.0 ± .25Vdc
265mA to 1300mA (display module
100 milliseconds max.
8 bit (Intel or Motorola)
EIA-232C, baud rate to 19.2Kb
reset, busy, dimming and bell alarm
output
power and data, single connector
high ≥ 3.5Vdc @ 5.0μA max.
low ≤ 1.5Vdc @ 0.5mA max.
high ≥ 4.6Vdc @ 5.0mA max.
low ≤ 0.4Vdc @ 5.0mA max.
parallel I/O lines are pulled up to +5Vdc
by internal 10kΩ resistors
high ≥ 2.4Vdc @ 1.0μA max.
low ≤ 0.5Vdc @ 1.6mA max.
high ≥ 3.5Vdc @ 150μA max.
low ≤ 0.5Vdc @ 4.0mA max.
parallel I/O lines are pulled up to +5Vdc
by internal 10kΩ resistors
5x7 dot matrix
5mm or 9mm
Blue-green, peak @ 5,000A
100fl min./200fl typ. (full bright)
150° cone
40,000 to 100,000 (no fixed message)
conforms to EIA-232 specification
available baud rate depends on
execution times)
1 stop bit)
dependent)
7740 Lemona Avenue, Van Nuys, California 91409-9234 U.S.A.
Tel: [phone] • 800-422-0867 • Fax: [phone] • email: [e-mail] • www.ieeinc.com
Software Control Features:
Selectable character sets**
Downloadable characters
Vertical scroll mode
Horizontal scroll mode
Set brightness levels
Column brightness**
Set blink field and rate **
Execute self-test
Character Set Features:
Primary:
Embedded:
* 90 Series “No-Frills” have 3 user defined characters
** Century Series only
Optional Filter Colors:
Neutral gray, blue, aqua, yellow, green, yellow (circular polarizer)
Note: Yellow is often used in low-light applications and may appear
neon-orange in color.
Regulatory:
UL (U.S. and Canada), CE, FCC, CSA (U.S. and Canada),
RoHS compliant
Environmental Characteristics:
Century Series
Standard operating temperature: -20°C to +70°C
Extended operating temperature: -40°C to +85°C
Storage temperature:
Relative humidity:
Vibration:
Shock:
“No-Frills” Series
Standard operating temperature: 0 to +55°C
Extended operating temperature: -40°C to +85°C (optional)
Storage temperature:
Relative humidity:
Vibration:
Shock:
-50°C to +85°C
0 to 90% (non-condensing)
10 to 50Hz, 2mm peak-to-peak (any axis)
20g (any axis)
-50°C to +85°C
0 to 95% (non-condensing)
10 to 50Hz, 2mm peak-to-peak (3-axis)
40g (3-axis) 9mS
Screen saver mode**
Blank display screen
Bell alarm output**
Read back data
Erase line data
Cursor locate
Software reset
96 character ASCII,
European (default), Katakana,
10 user defined characters*
Cyrillic, Hebrew**
030308