E5EN-Q3MT-500-N AC100-240 Omron, E5EN-Q3MT-500-N AC100-240 Datasheet - Page 37

• Manufacturer Part Number: E5EN-Q3MT-500-N AC100-240
• Description: Digital Temperature Controller
• Manufacturer: Omron

Specifications of E5EN-Q3MT-500-N AC100-240

• No. Of Digits / Alpha: 4
• Meter Function: Temperature
• Meter Range: -200°C To +2300°C
• Digit Height: 15.8mm
• Power Consumption: 10VA
• Operating Temperature Range: -10°C To +55°C
• Supply Voltage Max: 240V
• Supply Voltage Range: 100VAC To 240VAC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Characteristics
✽1. The indication accuracy of K thermocouples in the 200 to 1300 C range, T and N thermocouples at a temperature of 100 C max., and U
✽2. Ambient temperature: 10 C to 23 C to 55 C, Voltage range: 15% to 10% of rated voltage
✽3. K thermocouple at 100 C max.: 10 C max.
✽4. External communications (RS-232C or RS-485) and cable communications for the Setup Tool can be used at the same time.
Indication accuracy
Transfer output accuracy
Influence of temperature
✽2
Influence of voltage ✽2
Input sampling period
Hysteresis
Proportional band (P)
Integral time (I)
Derivative time (D)
Control period
Manual reset value
Alarm setting range
Affect of signal source
resistance
Insulation resistance
Dielectric strength
Vibration
resistance
Shock
resistance
Weight
Degree of protection
Memory protection
Setup Tool
Setup Tool port
Standards
EMC
and L thermocouples at any temperatures is 2 C 1 digit max. The indication accuracy of the B thermocouple at a temperature of 400 C max.
is not specified. The indication accuracy of B thermocouples in the 400 to 800 C range is 3 C max. The indication accuracy of the R and S
thermocouples at a temperature of 200 C max. is 3 C 1 digit max. The indication accuracy of W thermocouples is 0.3 of PV or 3 C,
whichever is greater, 1 digit max. The indication accuracy of PL II thermocouples is 0.3 of PV or 2 C, whichever is greater, 1 digit max.
Malfunction 10 to 55 Hz, 20 m/s
Destruction 10 to 55 Hz, 0.75-mm single amplitude for 2 hrs each in X, Y, and Z directions
Malfunction 100 m/s
Destruction 300 m/s
Approved
standards
Conformed
standards
Thermocouple: ( 0.1% of indicated value or 1 C, whichever is greater) 1 digit max. ✽1
Platinum resistance thermometer: ( 0.1% of indicated value or 0.5 C, whichever is greater) 1 digit max.
Analog input: 0.1% FS 1 digit max.
CT input: 5% FS 1 digit max.
Thermocouple input (R, S, B, W, PLII): ( 1% of PV or 10 C, whichever is greater) 1 digit max.
Other thermocouple input: ( 1% of PV or 4 C, whichever is greater) 1 digit max. ✽3
Platinum resistance thermometer: ( 1% of PV or 2 C, whichever is greater) 1 digit max.
Analog input: ( 1%FS) 1 digit max.
60 ms
Temperature input: 0.1 to 3240.0 C or F (in units of 0.1 C or F)
Analog input: 0.01% to 99.99% FS (in units of 0.01% FS)
Temperature input: 0.1 to 3240.0 C or F (in units of 0.1 C or F)
Analog input: 0.1% to 999.9% FS (in units of 0.1% FS)
0.0 to 3240.0 s (in units of 0.1 s)
0.0 to 3240.0 s (in units of 0.1 s)
0.5, 1 to 99 s (in units of 1 s)
0.0 to 100.0% (in units of 0.1%)
Thermocouple: 0.1 C/ max. (100
Platinum resistance thermometer: 0.1 C/
20 M
2,300 VAC, 50 or 60 Hz for 1 min (between terminals with different charge)
Controller: Approx. 150 g, Mounting Bracket: Approx. 10 g
Front panel: IP66, Rear case: IP20, Terminals: IP00
Non-volatile memory (number of writes: 1,000,000 times)
CX-Thermo version 4.0 or higher
Provided on the bottom of the E5CN-H. Use this port to connect a computer to the E5CN-H.
An E58-CIFQ1 USB-Serial Conversion Cable is required to connect the computer to the E5CN-H. ✽4
UL 61010-1, CSA C22.2 No. 1010-1
EN 61010-1 (IEC 61010-1): Pollution level 2, overcurrent category II
EMI:
Radiated Interference Electromagnetic Field Strength: EN 55011 Group 1, class A
Noise Terminal Voltage:
EMS:
ESD Immunity:
Electromagnetic Field Immunity:
Burst Noise Immunity:
Conducted Disturbance Immunity:
Surge Immunity:
Power Frequency Magnetic Field Immunity:
Voltage Dip/Interrupting Immunity:
0.3% FS max.
19999 to 32400 (decimal point position depends on input type)
min. (at 500 VDC)
2
2
, 3 times each in X, Y, and Z directions
, 3 times each in X, Y, and Z directions
2
for 10 min each in X, Y, and Z directions
max.)
max. (10
EN 61326
EN 55011 Group 1, class A
EN 61326
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-6
EN 61000-4-5
EN 61000-4-8
EN 61000-4-11
max.)
E5CN-H
37