H3CR-A8 100-240AC/100-125VDC Omron, H3CR-A8 100-240AC/100-125VDC Datasheet - Page 17

• Manufacturer Part Number: H3CR-A8 100-240AC/100-125VDC
• Description: Multifunction Timer
• Manufacturer: Omron

Specifications of H3CR-A8 100-240AC/100-125VDC

• Time Range: 0.05 Sec To 30 Hr
• Height: 48mm
• Supply Voltage Ac, Min: 100V
• Supply Voltage Dc, Max: 125V
• Supply Voltage Dc, Min: 100V
• Supply Voltage Ac, Max: 240V
• Voltage Ac: 240V
• External Width: 48mm
• External Depth: 67mm

H3CR-A
H3CR-AP
Voltage Inputs
The start input of the H3CR-AP is voltage input. (Voltage imposition or open)
No-contact Input
(Connection to PNP open
collector output sensor)
Sensor
Voltage Input Signal Levels
12 to 24 VDC
(sensor power supply)
No-contact
input
Contact
input
Operates with PNP transistor ON
1. Transistor ON
Residual voltage: 1 V max.
The voltage between terminals 6 and 7 must be 10.8 VDC min.
2. Transistor OFF
Leakage current: 0.01 mA max.
The voltage between terminals 6 and 7 must be 1.2 VDC max.
Use contacts that can adequately switch 0.1 mA at each oper-
ating voltage.
The voltage between terminals 6 and 7 with contacts ON or
OFF must satisfy the specified value.
Contacts ON
100-to-240-VAC and 100-to-125-VDC models: 85 to 264 VAC
or 85 to 137.5 VDC
24-to-48-VAC and 12-to-48-VDC models: 20.4 to 52.8 VAC or
10.8 to 52.8 VDC
Contacts OFF
100-to-240-VAC and 100-to-125-VDC models: 0 to 10 VAC or
0 to 10 VDC
24-to-48-VAC and 12-to-48-VDC models: 0 to 2.4 VAC or 0 to
1.2 VDC
+
–
10 Power
6
7
2
DC power
supply
Timer
Power
supply
(–)
supply (+)
Start
Input 0V
Note: The input circuit is isolated from the
No-contact Input
(Connection to NPN open
collector output sensor)
Sensor
12 to 24 VDC
(sensor power supply)
Operates with NPN transistor ON
power supply circuit. Thus, an NPN
transistor can be connected.
+
–
10 Power
6
7
2
DC power
supply
Timer
supply (+)
Start
Input 0V
Power
supply
(–)
Contact Input
Note: Refer to the signal levels in the fol-
Operates with relay ON
lowing table and be aware of the
minimum applicable load of the relay.
10 Power
6
7
2
Timer
supply (+)
Start
Input 0V
Power
supply
(–)
H3CR-A
19