SNAP-AIV OPTO 22, SNAP-AIV Datasheet - Page 2

• Manufacturer Part Number: SNAP-AIV
• Description: I/O Module
• Manufacturer: OPTO 22
• Type: Inputr

Specifications of SNAP-AIV

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Supply Voltage Min: -10VDC
• Signal Input Type: -10 To 10VDC
• Supply Voltage Max: 10VDC
• Resolution: 0.4mV
• No. Of Analog Inputs: 2
• Brand/series: SNAP Series
• Connection To Host: Backplane
• Current, Input: 170 mA
• Dimensions: 82.55mmL×18.29mmW×90.17mmH
• Input: -10 to +10/-5 to +5 VDC
• Input Type: Analog
• Input, Range: -10 to +10/-5 to +5 VDC
• Mounting Type: PCB
• Number Of Channels: 2
• Number Of Inputs: 2 Channels
• Primary Type: Control
• Resistance, Input: 1 Megohms
• Special Features: Transformer Isolation, Optical Isolation
• Standards: UL, CSA, CE Certified
• Temperature, Operating: 0 to +70 °C
• Time, Response: 10 ms
• Voltage, Isolation: 1500 V
• Voltage, Supply: 5 VDC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

SNAP Analog Input Modules
Voltage Input Module, -10 VDC to +10 VDC or -5 VDC to +5 VDC,
Two or Four Channels
SNAP-AIV (Two channels)
Four-channel module wiring is shown on
IMPORTANT: The mounting rack connector has 24 pins; the module
connector has 20 pins. The extra pins on the mounting rack connector
prevent misalignment of the module during installation.
page
24.
Description
The SNAP-AIV and SNAP-AIV-4 modules can be configured for either -10 VDC
to +10 VDC or -5 VDC to +5 VDC operation on each channel. The SNAP-AIV
provides two channels, and the SNAP-AIV-4 four. If you need a module with
more channels, see
compatibility.
Note that all channels share a common reference terminal. If you need two
isolated channels on the same module, see Opto22 form #1182.
Specifications
SNAP-AIV
SNAP-AIV-4
Input Range
Resolution
Input Filtering
Input Response Time
(% of span/ delta V / delta t)
DC Common Mode Rejec-
tion
AC Common Mode Rejec-
tion
Maximum Survivable Input
Maximum Operating Com-
mon Mode Voltage
Accuracy
Gain Temperature Coeffi-
cient
Offset Temperature Coeffi-
cient
Isolation
Power Requirements
Input Resistance
Ambient Temperature:
Part Number
Operating
Storage
Two-channel analog voltage input -10 to +10 VDC
Four-channel analog voltage input -10 to +10 VDC
page
25. See the table on
From -10 volts to +10 volts
From -5 volts to +5 volts
0.4 mV when configured -10 to +10 volts
0.2 mV when configured -5 to +5 volts
-3 dB @ 64 Hz
63.2% / 6.7 V / 10 ms
>-120 dB
>-120 dB @ 60 Hz
220 VAC or 300 VDC
250 V
0.05%, 5 mV @ 10 VDC
2.5 mV @ 5 VDC
30 PPM/ °C
15 PPM/ °C
1500 V
5 VDC (±0.15) @ 170 mA
1 M ohms (each channel; both channels
share the same reference point)
0 °C to 70 °C
-25 °C to 85 °C
Description
page 2
for I/O processor
PAGE
23