SNAP-AIV-I OPTO 22, SNAP-AIV-I Datasheet - Page 6

• Manufacturer Part Number: SNAP-AIV-I
• Description: I/O Module
• Manufacturer: OPTO 22
• Type: Inputr

Specifications of SNAP-AIV-I

• Accessory Type: Analog Voltage Input Module
• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Signal Input Type: -10 To 10VDC / -5 To 5VDC
• Resolution: 0.4mV
• Brand/series: SNAP Series
• Connection To Host: Backplane
• Current, Input: 200 mA
• Dimensions: 82.55mmL×18.29mmW×90.17mmH
• Input: -5 to +5/-10 to +10 V
• Input Type: Analog
• Input, Range: -5 to +5/-10 to +10 V
• Mounting Type: PCB
• Number Of Channels: 2
• Number Of Inputs: 2 Channels
• Primary Type: Control
• Resistance, Input: 1 Megohms
• Special Features: Transformer Isolation, Optical Isolation
• Standards: UL, CSA, CE Certified
• Temperature, Operating: 0 to +70 °C
• Time, Response: 10 ms
• Voltage, Isolation: 4000/1500 V
• Voltage, Supply: 5 VDC
• No. Of Analog Inputs: 2
• Rohs Compliant: No
• For Use With: SNAP PAC System
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

PAGE
6
Current Input Module, -20 mA to +20 mA, Two or Four Channels
Specifications
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] • SUPPORT 800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
© 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
Input Range
Resolution
Over-Range Limits
Input Response Time
(% of span/ delta I/delta tme)
Data Freshness (Max)
DC Common Mode Rejection
AC Common Mode Rejection
Maximum Survivable Input
Maximum Operating Common
Mode Voltage
Accuracy
DRIFT: Gain Temperature
Coefficient
DRIFT: Offset Temperature
Coefficient
Power Requirements
Input Resistance - Single
Ended
Operating Temperature
Storage Temperature
Torque, hold-down screws
Torque, connector screws
Agency Approvals
Warranty
SNAP-AIMA Wiring
(Two channels)
-20 mA to +20 mA
0.8 microamps
From -22 to +22 mA
(+/-20 mA range)
99.9% / 19.9 mA / 10 ms
SNAP-AIMA: 11.5 ms
SNAP-AIMA-4: 23 ms
>-120 dB
>-120 dB @ 60 Hz
36 mA or 9 VDC
250 V
0.05% (10 microamps)
30 PPM/ °C
15 PPM/ °C
5 VDC (±0.15 ) @ 170 mA
200 ohms (each channel)
0 °C to 70 °C
-25 °C to 85 °C
4 in-lb (0.45 N-m)
5.26 in-lb (0.6 N-m)
UL, FM, CE, RoHS, DFARS
Lifetime
Description
The SNAP-AIMA and SNAP-AIMA-4 modules provide an input
range of -20mA to +20mA. The SNAP-AIMA has two channels,
and the SNAP-AIMA-4 has four. If you need a similar module
with more channels, see
I/O processor compatibility. These modules DO NOT supply
loop excitation current.
Since all inputs share a common reference, the module must
be installed at the beginning or end of a typical 4–20mA loop.
If you are using both standard
and self-sourcing transmitters,
either put the transmitters on
different modules or use
different power supplies. If you
need channels that are isolated
from each other on the same
module, see Opto 22 form #1182.
Part Number
SNAP-AIMA
SNAP-AIMA-4
SNAP Analog Input Modules
Wiring diagrams continue
on the following page.
Description
Two-channel analog current input,
-20 mA to +20 mA
Four-channel analog current input,
-20 mA to +20 mA
page
9. Check the table on
page 3
for