SNAP-PAC-EB2 OPTO 22, SNAP-PAC-EB2 Datasheet - Page 10

I/O Processor

SNAP-PAC-EB2

Manufacturer Part Number
SNAP-PAC-EB2
Description
I/O Processor
Manufacturer
OPTO 22
Type
PC Basedr
Datasheets

Specifications of SNAP-PAC-EB2

Accessory Type
Communication Processor
Leaded Process Compatible
No
Peak Reflow Compatible (260 C)
No
Signal Input Type
Ethernet, RS-232
Battery Type
CR2032 Lithium
Brand/series
SNAP Series
Communication
RS-232/485
Current, Input
750 mA
Dimensions
3.3"L×1.83"W×3.7"H
Input Type
Analog/Digital/Serial
Memory
16 MB RAM
Mounting Type
Rack
Network Protocols
IEEE 802.3
Number Of Inputs
4
Output Type
Analog/Digital/Serial
Primary Type
Controller
Temperature, Operating
0 to 60 °C
Voltage, Supply
5-5.2 VDC
For Use With
SNAP PAC System
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
PAGE
10
System Architecture (continued)
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2007–2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP PAC Ethernet Brains offer two options for wired
networking. As shown in the diagram on
networked in a standard star configuration using off-the-shelf
Ethernet network switches or routers.
As shown below, SNAP PAC Ethernet brains can also be
networked in a daisy-chain configuration, using the two
switched Ethernet interfaces on each brain.
One or more PCs running a PAC Display
HMI for operators or technicians.
PC used to develop a PAC Control strategy.
Once developed, the strategy runs
independently on the SNAP PAC controller.
page
8, they can be
SNAP PAC R-series controller running a PAC Control strategy
SNAP PAC EB brains and I/O (distributed units), daisy chained
In this diagram, a rack-mounted SNAP PAC R-series controller
runs the PAC Control strategy and controls the system. The
distributed brains are daisy-chained together, eliminating the
expense of additional routers or switches.
NOTE: A Wired+Wireless EB brain does not provide access to
dasiy-chained brains through its wireless LAN interface,
because that interface has a different IP address. Data can go
only through the wired interfaces, which use the same IP
address.
SNAP PAC Brains

Related parts for SNAP-PAC-EB2