72-1098 TENMA, 72-1098 Datasheet - Page 4

• Manufacturer Part Number: 72-1098
• Description: POWER SUPPLY, BENCH, 145V
• Manufacturer: TENMA

Specifications of 72-1098

• Power Supply Output Type: Variable
• No. Of Outputs: 2
• Output Voltage: 145V
• Output Voltage 2: 145V
• Output Current: 7A
• Input Voltage: 110V AC To 127V AC
• Length: 260.35mm
• Width: 301.625mm
• Height: 155.575mm

1.
This fuse interrupts the power prior to the isolation transformer and should only be replaced with
the same type of AGC, 10A fast blow type.
2.
Placed in the up position, the unit will be powered on and the indicator light will be illuminated.
3.
This rotary control adjusts the output voltage from zero (counterclockwise) to full voltage
(clockwise). The maximum output is directly proportional to the supply voltage. With supply
voltage of 110VAC, the maximum output voltage is 145VAC.
4.
Displays set voltage that will be provided to the output receptacle.
5.
Displays the current of the connected load
6.
This fuse interrupts the power after the adjustable voltage variac. The maximum value of this
fuse is 5A, as provided. Smaller values may be used to provide protection at a lower current.
Only AGC fast blow type fuses should be used.
This grounded three-prong receptacle provides isolated AC output, at a voltage level as
determined by the Variable Voltage Control.
7.
Line Fuse
Power-On Switch with Built-In Pilot Lamp
Variable Voltage Control
Output Voltage Meter
Output Current Meter
Output Fuse
Output Receptacle
CONTROLS AND PANEL LAYOUT
4