TEP 150-4812WI TRACOPOWER, TEP 150-4812WI Datasheet - Page 3

• Manufacturer Part Number: TEP 150-4812WI
• Description: DC/DC CONVERTER, 12V, 150W
• Manufacturer: TRACOPOWER
• Type: Industrialr

Specifications of TEP 150-4812WI

• Dc / Dc Converter O/p Type: Fixed
• No. Of Outputs: 1
• Input Voltage: 18V To 75V
• Power Rating: 150W
• Output Voltage: 12V
• Output Current: 12.5A
• Approval Bodies: UL, EN, IEC
• Supply Voltage: 48V
• Brand/series: TEP 150WI Series
• Configuration: Enclosed
• Mounting Type: Panel
• Number Of Outputs: 1
• Operation: Switching
• Output: 12 V @ 12.5 A
• Primary Type: DC-DC
• Special Features: Ultra-wide 4:1 input voltage range; I/O isolation 2250 VDC (basic insulation);Easy chassis and wall mounting;Overtemperature protection
• Compact Dimensions: 98 × 52 × 34 mm
• Ultra-wide 4: 1 Input Voltage Range
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
General Specifications
Temperature ranges
Derating
Over temperature protection
Thermal shock
Humidity (non condensing)
Reliability, calculated MTTF (MIL-HDBK-217F, @+25°C, ground benign)
Isolation voltage (60sec.)
Isolation capacitance
Isolation resistance
Switching frequency
Safety standards
Safety approvals
Remote On/Off
Environmental compliance
Physical Specifications
Casing material
Potting material
Weight
Mounting recommendation
Application note:
www.tracopower.com/products/tep150wi-application.pdf
– Operating
– Case temperature
– Storage
– Input/Output
– Input/Case
– Output/Case
– Input/Output
– Input/Output (500 VDC)
– UL/cUL 60950-1
– CB report according to IEC 60950-1
– positive logic (standard)
– negative logic (option -N)
– Off idle current:
– Reach
– RoHS
– Off: 0 to 1.2 VDC or short circuit pin 5 and 3
– Off: 3 to 12 VDC or open circuit
– On: 3 to 12 VDC or open circuit
– On: 0 to 1.2 VDC or short circuit pin 5 and 3
–40°C to +75°C
+100°C max.
–55°C to +125°C
see application note
at 110°C (auto restart)
acc. MIL-STD-810F
95 % rel H max.
>180‘000 h
2250 VDC (functional insulation)
1500 VDC
1500 VDC
2500 pF max.
>1 GOhm min.
220 – 330 kHz depending on model
(puls width modulation)
UL 60950-1, IEC/EN 60950-1
www.ul.com
www.tracopower.com/products/tep150wi-cb.pdf
3 mA
www.tracopower.com/products/tep150wi-reach.pdf
RoHS directive 2002/95/EC
metal
silicon (UL 94V-0 rated)
300 g (10.6 oz)
not to mount on plastic surface (temperature!)
DC/DC Converters
TEP 150WI Series 150 Watt
-> certifications -> File E188913
Page 3 of 4