TSM 1212D TRACOPOWER, TSM 1212D Datasheet - Page 2
![DC/DC CONVERTER, SMD, 1W, +/-12V](/photos/21/61/216121/4686629_sml.jpg)
TSM 1212D
Manufacturer Part Number
TSM 1212D
Description
DC/DC CONVERTER, SMD, 1W, +/-12V
Manufacturer
TRACOPOWER
Datasheet
1.TSM_0505D.pdf
(5 pages)
Specifications of TSM 1212D
Dc / Dc Converter O/p Type
Fixed
No. Of Outputs
2
Input Voltage
10.8V To 13.2V
Power Rating
1W
Output Voltage
12V
Output Current
40mA
Output Voltage 2
-12V
Output Current 2
-40mA
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Input Specifications
Input current no load / full load
Surge voltage (1 sec. max.)
Reverse voltage protection
Reflected input ripple current
Input filter
Output Specifications
Voltage set accuracy
Voltage balance (dual output models)
Regulation
Ripple and noise (20 MHz Bandwidth)
Temperature coefficient
Short circuit protection
Capacitive load
General Specifications
Temperature ranges
Humidity (non condensing)
Reliability, calculated MTTF (MIL-HDBK-217F, @+25°C, ground benign)
Isolation voltage (60 sec.)
Isolation capacity
Isolation resistance
Switching frequency
Frequency change over line and load
Physical Specifications
Casing material
Package weight
Reflow soldering profile
Packaging
– Input variation
– Load variation 20 – 100 %
– Operating
– Storage
– Input/Output
– Input/Output
– Input/Output
(see also enclosed derating curve)
single output models: 22 µF max.
single output models: 1.2 g (0.04 oz)
dual output models: 10 µF max.
dual output models: 1.5 g (0.05 oz)
24 Vin models: 8 mA / 55 mA typ.
24 Vin models: 30 V max.
12 Vin models: 15 mA / 110 mA typ.
12 Vin models: 18 V max.
24Vin modes: tba
5 Vin models: 30 mA / 260 mA typ.
5 Vin models:
0.3 A max.
can be reduced by ext. 1–2.2 µF polyester film
capacitor
internal capacitors
±3 %
±1 % max.
1.2 % / 1 % change Vin
10 % max.
120 mVpk-pk max.
±0.02 %/°C
limited 1 sec. max.
–40°C to +85°C (no derating)
–55°C to +125°C
95 % rel H max.
>2’000’000 h
1‘000 VDC
40 pF typ.
>1‘000 Mohm
100 kHz typ. (frequency modulation)
±30 %
epoxy molding compound
(flammability to UL 94V-0 rated)
peak temp. 245°C (10 sec. max.)
217°C for 90 sec. max. Convection reflow
solder process is recommended
www.tracopower.com
9 V max.
DC/DC Converters
TSM Series
/
products
/
tsm
-pack.pdf
Page 2 of 5
1 Watt