B72482S9999X2 EPCOS Inc, B72482S9999X2 Datasheet - Page 27
![LAB KIT, SHCV, MOTOR](/photos/39/49/394963/4764303_sml.jpg)
B72482S9999X2
Manufacturer Part Number
B72482S9999X2
Description
LAB KIT, SHCV, MOTOR
Manufacturer
EPCOS Inc
Datasheet
1.B72482S9999X2.pdf
(29 pages)
Specifications of B72482S9999X2
Rohs Compliant
YES
Svhc
No SVHC (20-Jun-2011)
Features
9 Automotive Series (SR1K20M105X, SR1K20M155X, SR1K20M225X, SR2K20M474X, SR2S14BM475X, SR6K35M474X, SR6K35M474X, SR6K20M105X, SR6K20M105X)
Storage
Handling
Mounting
Soldering
Please read Cautions and warnings and
Important notes at the end of this document.
Leaded transient voltage/RFI suppressors (SHCVs)
SHCV series
therefore not advisable, and it is only allowed together with safety countermeasures like
thermal fuses.
Only store CTVS in their original packaging. Do not open the package before storage.
Storage conditions in original packaging: temperature
annual average, maximum 95%, dew precipitation is inadmissible.
Do not store CTVS devices where they are exposed to heat or direct sunlight. Otherwise the
packaging material may be deformed or CTVS may stick together, causing problems during
mounting.
Avoid contamination of the CTVS surface during storage, handling and processing.
Avoid storing CTVS devices in harmful environments where they are exposed to corrosive
gases for example (SO
Use CTVS as soon as possible after opening factory seals such as polyvinyl-sealed packages.
Solder CTVS components after shipment from EPCOS within the time specified:
Do not drop CTVS components and allow them to be chipped.
Do not touch CTVS with your bare hands - gloves are recommended.
Avoid contamination of the CTVS surface during handling.
When CTVS devices are encapsulated with sealing material or overmolded with plastic
material, electrical characteristics might be degraded and the life time reduced.
Make sure an electrode is not scratched before, during or after the mounting process.
Make sure contacts and housings used for assembly with CTVS components are clean before
mounting.
The surface temperature of an operating CTVS can be higher. Ensure that adjacent
components are placed at a sufficient distance from a CTVS to allow proper cooling.
Avoid contamination of the CTVS surface during processing.
Multilayer varistors (MLVs) with AgPd termination are not approved for lead-free soldering.
Complete removal of flux is recommended to avoid surface contamination that can result in an
instable and/or high leakage current.
Use resin-type or non-activated flux.
Bear in mind that insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended, otherwise a component may crack.
CTVS with Ni barrier termination, 12 months
CTVS with AgPd termination, 6 months
SHCV and CU series, 24 months
x
, Cl).
Page 27 of 29
25 to +45 C, relative humidity 75%