TSP 360-124WR TRACOPOWER, TSP 360-124WR Datasheet - Page 5

• Manufacturer Part Number: TSP 360-124WR
• Description: PSU, METAL, 360W, 24V/15A
• Manufacturer: TRACOPOWER

Specifications of TSP 360-124WR

• Power Supply Type: Switch Mode
• Power Supply Output Type: Fixed
• No. Of Output Channels: 1
• Input Frequency: 63Hz
• Output Voltage: 24V
• Output Current: 15A
• Power Rating: 360W
• Input Voltage: 85VAC To 132VAC /
• No. Of Outputs: 1
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

http://www.tracopower.com
The TSP-BFM24 buffer module will hold the output voltage of a 24 VDC power sup-
ply after brown outs or voltage dips of up to ten full 50Hz cycles. During this buffer
period no deterioration of the 24 VDC output voltage will occur. For many applica-
tions this buffer module is an ideal and cost effective alternative to a battery based
backup system. The buffer module consists of a large bank of capacitors. When the
power supply is switched on, the buffer capacitors will be charged. This will take
approximately 30 seconds and an opto-coupler signal indicates the “READY“ con-
dition. When a power fail occurs, the capacitor bank is discharged, maintaining the
output of the buffer module at its nominal voltage. This condition is indicated by an
“POWER FAIL“ signal. The hold up time is typically 200 ms at 25 A and 4 seconds
typically at 1,2A. After 4 seconds the buffer device will switch off the output voltage.
The operation modes of the module are indicated by a LED on the front panel also.
The big advantage of this buffer solution is, that it is fully maintenance free and its
storage capability does not deteriorate over the live time of the product.
Function Diagram
Specifications
Operating temperature
Electromagnetic compatibility
Buffer voltage
Charging
Status signals
Inhibit
Dimensions
Installation instructions
Models
TSP–BFM24 Buffer Module
Load
(includes terminal plugs)
TSP
Order Code
TSP-BFM24
Active
Inhibit
J2.2
J2.1
J1.1
J1.2
J1.3
J1.4
J2.4
J2.3
Volt adjust
Detection
Voltage
Operating Voltage
Detection
Voltage
24...28VDC
Discharge
Charge
Range
J2.6
J2.5
Ready
20­0­ms typ. @ 25A max.
4.0­ s max. @1.2 A
Buffer Time
Connector Positions
– 25 °C to 70 °C max. (–13 °F to 158 °F)
derating above 40 °C (104 °F): 1.5 %/K
in correspondence to connected units (no internal
switching device)
adjustable, >1 V below input voltage, min. 22 VDC
0.6 A max./30 s max.
Buffer Active , Buffer Ready (optocoupler output)
and dual colour LED for status indication
optocoupler input: 35 V max. < 5mA
see page 8
www.tracopower.com/products/tsp-bfm_inst.pdf
Industrial Power Supplies
TSP-WR Series
Output Power
60­0­ W
max.
180­–60­0­ Watt
Page 5 of 11