3RV10110JA10 SIEMENS, 3RV10110JA10 Datasheet - Page 28

• Manufacturer Part Number: 3RV10110JA10
• Description: CIRCUIT-BR, 0.70/1A
• Manufacturer: SIEMENS
• Series: 3RVr

Specifications of 3RV10110JA10

• No. Of Poles: 3
• Voltage Rating Vac: 690V
• Mounting Type: DIN Rail (EN 50022)
• Approval Bodies: UL, CSA, VDE
• Breaking Capacity Current Ac: 100kA
• Current Max: 1.00A
• Current Min: 0.70A
• External Depth: 81mm

■
Accessories
Enclosures and front plates
Overview
Enclosures
For installing motor starter protectors of sizes S00 (I
S0 (I
plastic enclosures for surface mounting and molded-plastic
enclosures for flush mounting are available in various
dimensions.
When installed in a molded-plastic enclosure the motor starter
protectors have a rated operational voltage U
The enclosures for surface mounting have the degree of
protection IP55; the enclosures for flush mounting also comply
with the degree of protection IP55 at the front (the flush-mounted
section complies with IP20).
Enclosure for surface mounting
Enclosure for flush mounting
All enclosures are equipped with N and PE/ground terminals.
There are two knock-out cable entries for cable glands at the top
and two at the bottom; also on the rear corresponding cable
entries are scored. There is a knock-out on the top of the
enclosure for indicator lights that are available as accessories.
The narrow enclosure can accommodate a motor starter
protector without accessories, with transverse and lateral
auxiliary switch, whereas wide enclosures and enclosures for S2
motor starter protectors also provide space for a laterally
mounted auxiliary release. There is no provision for installing a
motor starter protector with an alarm switch.
With S00 motor starter protectors, the switch rocker is operated
by means of the actuator diaphragm of the enclosure. A locking
device, capable of holding up to three padlocks, can be fitted
onto the actuator diaphragm to prevent the motor starter
protector from closing during maintenance work, for example.
A mushroom-shaped EMERGENCY-STOP knob can be fitted in
place of the locking device. If it is actuated abruptly, the motor
starter protector opens and the mushroom-shaped knob
latches. The knob can be unlatched again either by turning it or
5/28
nmax
3RV Motor Starter Protectors up to 100 A
= 25 A) and S2 (I
Siemens LV 1 · 2006
nmax
= 50 A) as a single unit, molded-
e
of 500 V
nmax
= 12 A),
by using a special key. The motor starter protector can
subsequently be switched on again.
The molded-plastic enclosures of S0 and S2 motor starter
protectors with rotary operating mechanism are fitted with a
rotary operating mechanism as well.
The enclosures can be supplied with a black rotary operating
mechanism or with an EMERGENCY-STOP rotary operating
mechanism with a red/yellow knob.
All rotary operating mechanisms can be locked in the Open
position with up to 3 padlocks.
Front plates
Motor starter protectors are frequently required to be actuated in
any enclosure. Front plates equipped with an actuating
diaphragm for size S00 motor starter protectors, or rotary
operating mechanism for S0 to S3 motor starter protectors are
available for this purpose.
The front plates for size S00 have a retaining frame into which the
motor starter protectors can be snapped. A retaining frame for
size S0 motor starter protectors is available for front plate sizes
S0 to S3.
Front plate for size S00
Accessories for enclosures and front plates