DS00161 Microchip Technology, DS00161 Datasheet - Page 21

• Manufacturer Part Number: DS00161
• Description: Technical Library CD-ROM
• Manufacturer: Microchip Technology

Specifications of DS00161

• Tool Type: Manuals
• Lead Free Status / RoHS Status: na

1.7
 2000 Microchip Technology Inc.
Installing the ICEPIC In-Circuit Emulator
Hardware
1.7.1
1.7.2
This section discusses how to install the daughter board to the motherboard
and connect the ICEPIC In-Circuit Emulator to your PC.
Tools Required
The tools required for this procedure consist of:
Removing the Pod Cover
1. Because you will need to connect a daughter board to the ICEPIC moth-
2. Carefully remove the top of the pod, followed by the front plate (labeled
It is not necessary to remove the motherboard from the pod to connect the
daughter board.
WARNING
WARNING
Note:
• Phillips head screwdriver
erboard, the ICEPIC pod is not secured together when shipped. The
screws that hold the pod together are taped to the inside of the front
cover.
ICEPIC-16CXXX).
Be sure to disconnect the power supply from the pod prior to per-
forming these procedures.
If the power supply shipped with this unit contains a 3-pin
I.E.C. mains input, the earth pin is connected directly to the
system 0 volts. This is linked to the target header probe and
the RS-232 port.
Care must be taken to avoid exposing the target probe cable
to any excessive static or reverse voltage. Therefore, it is
strongly recommended you ground yourself prior to handling
the ICEPIC motherboard or the daughter boards.
Overview and Installation
For users OUTSIDE the UK only!
DS51103B-page 15