E22-01 Omron, E22-01 Datasheet - Page 4

• Manufacturer Part Number: E22-01
• Description: E2R-A01 PROX CONNECTOR
• Manufacturer: Omron

Specifications of E22-01

• Accessory Type: Connector
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: OR560
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

E2R-A01
Precautions
Effects of Surrounding Metal
If there is any metal near the sensor, the metal may effect the per-
formance of the E2R or the temperature of the metal may effect
the sensing distance of the E2R. Make sure that the clearances
given in the following illustrations are maintained for accurate
sensing operation.
Mutual Interference
When installing two or more E2R units face to face or side by
side, make sure that the minimum distances given in the following
illustration is maintained.
4
OMRON ELECTRONICS LLC
One East Commerce Drive
Schaumburg, IL 60173
1-800-55-OMRON
Cat. No. GC APMS-1
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, divide by 25.4
9/02
Specifications subject to change without notice
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.com/oci
Handling and Connections
The E2R incorporates a connector. Do not solder connector pins
to lead wires. Use the E22-01 Connector or Molex connector
(housing 010308033 and terminal 008700057) or Japan Molex
connector (housing 5209-03 and terminal 5103).
Do not impose external force on the terminal as shown in the fol-
lowing illustration or else the terminal may be damaged.
Do not connect or disconnect the connector with the E2R turned
on as the E2R may be damaged.
Power Supply
When using a standard switching regulator with the E2R, ground
the frame ground (FG) and ground (G) terminals of the switching
regulator for stable operation.
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
416-286-6465
Printed in USA
E2R-A01